Operating Instructions

8
RQT9118
Basic Connection
Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
Be sure to read the Caution for AC Mains Lead on page 3.
Connecting to a Television only
Rear of TV
AV1
(
TV
)
COMPONENT
VIDEO OUT
AV OUT
AV2
(
EXT
)
RF IN
AV
Rear of this unit
To household
mains socket
step
To household
mains socket
step
To the aerial
step
step
step
2
1
3
4
4
Connections other than the 21-pin Scart cable
59
The RF coaxial cable cannot
be used for showing pictures
from the unit. The unit must
be connected using another
method, e.g. 21-pin Scart
cable to show pictures from
the unit on the television set.
Aerial cable to the “RF IN” on the unit.
RF coaxial cable (supplied) from the “RF OUT” on the unit to the “RF IN” on the TV.
21-pin Scart cable (not supplied ) from the “AV1 (TV)” on the unit to the “AV” on the TV.
AC mains lead ( supplied ) from the “AC IN~” on the unit and the TV to a household mains
socket.
After completing the above connections, proceed to the TV Tuning (➔ 11).
Use of the RF coaxial cable
Keep the RF coaxial cables as far away as possible from other cables.
Do not roll up the RF coaxial cables.
•
•
DMR-EZ28-EB _RQT9118-B.indb 8DMR-EZ28-EB _RQT9118-B.indb 8 2008/04/04 10:31:462008/04/04 10:31:46