Operating Instructions

Getting started

VQT4W80

CI (Common Interface) module

An appropriate CI module is required to view or record the encrypted broadcast.

You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a

subscription with the corresponding broadcaster.

• If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.

TV service encryption is automatically decrypted and the broadcast can be viewed or recorded. (The

recording might be prohibited by broadcasters.)

• Some CAMs may request a PIN. If prompted to enter a PIN code, enter the PIN code with the number

buttons.

• If the PIN is not entered, timer recording may not work correctly. The PIN for timer recording can be

entered later. (> 73, 77, PIN Entry for Decrypt Recording)

Notes for recording of an encrypted broadcast (> 31)

• You can insert one or two different CAMs with Smart Cards into this unit.

• Be sure to insert the CI module horizontally into the slot.

• Insert the CAM and the Smart Card with the correct direction.

• When removing the CI module, pull it straight out.

• For more details, see the manual of the CAM and Smart Card, or consult the dealer.

• The Common Interface supports the modules that comply with DVB Specification and CI Plus Specification.

• Turn off the unit before you insert or remove the CI module.

1 Insert the certified Smart Card into the CAM (both optional).

2 Insert the CI module into the CI (Common Interface) slot of this unit.

CAM

Smart Card

CI module

CI (Common Interface) slot

This unit’s rear panel

CI module

Please peel off this label to use CI module.

DMR-HST230_130EG_eng.book 12 ページ２０１３年７月８日　月曜日　午後５時４５分