Operating Instructions

Getting started
VQT4W80
19
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
5 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
6 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 80)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> 20)
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
• If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 75)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 25)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3 Select the language.
When using a Single cable router
1 Press [RETURN ] after selecting the
language.
2 Go to page 21, step 1.
4 Follow the on-screen instructions and make
the following settings.
• Country
• Number of cables to connect
• Search mode
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 85, Clock).
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
LNB in 1 LNB in 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking... Checking...
0%
100%
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 100)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
DMR-HST230_130EG_eng.book 19 ページ ２０１３年７月８日 月曜日 午後５時４５分