Operating Instructions

Watching broadcasts

VQT4W80

Watching broadcasts

Wat ching

broadcasts

To switch to the channel you have previously

watched

Press [LAST VIEW ].

• This function will work only for the channels you

have watched for more than 10 seconds.

To switch to the radio channels or to the all

channels

Press [RADIO/TV].

• Selection of channel is made easy by creating a Favourite

of the channels. (> 75, Favourites Edit)

• When you are watching the 3D programme, subtitles and

TV Guide, etc., may not display correctly depending on the

settings. (> 43, 44, 3D Type, Signal Format)

Enter the PIN with the number buttons by

following the on-screen instructions.

• If you decide on a PIN, make a note it in case

you forgot it.

• PIN (except CAM’s) can be changed via “PIN

Entry”. (> 85)

• For CAM’s PIN, refer to your CAM’s operating

instructions.

To watch an encrypted broadcast, insert the CI

module into the CI slot. (> 12)

• Set according to the CI module. (> 73, 81,

Common Interface)

Instructions for operations are generally

described using the remote control. (> 10)

Press [CH WX] to select the channel.

• You can also select the channel by the

following operations.

- Using number buttons

- Using Channel List (> 25)

- Using TV Guide system (> 25)

- Using channel information (> 26)

If this unit request a PIN

If encrypted channels do not appear

DMR-HST230_130EG_eng.book 24 ページ２０１３年７月８日　月曜日　午後５時４５分