Operating Instructions
Convenient functions
VQT4W80
76
Basic Settings
Manual Tuning
You can add new channels manually.
1 Select the items and change the items.
• Change the items by checking the signal
strength and signal quality displays.
2 Select “Start scan”, press [OK] to start scan.
• The set channel is displayed in the table.
• This function is not available during an Operator profile
update. (> 27)
Update Channel List
You can update the channel list to the latest one.
1 Select the method and settings.
Search Mode
• Free Channels
Search for free channels only.
• All Channels
Search for all channels.
Scan Mode
•Quick
Scans the suitable frequency for the
selected satellite.
•Full
Scans the whole frequency range.
2 Press [OK].
The unit starts searching for newly available
satellite digital channels.
• This function is not available during an Operator profile
update. (> 27)
Exchange Channel List
Exports/Imports DVB-S Channel List settings
using the SD card to share the same settings
with another DIGA which has the same function.
• Export Channel List
You can export the channel list of this unit to
the SD card.
• Import Channel List
You can import the channel list of another
DIGA from SD card.
Signal Condition
You can check the quality and strength of
signals.
• Press [2, 1] to select the LNB.
• Press [CH WX] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
DMR-HST230_130EG_eng.book 76 ページ 2013年7月8日 月曜日 午後5時45分