Operating Instructions

Convenient functions
VQT4W80
77
Antenna System
You can receive several satellites if you have
DiSEqC control antenna system or single cable
router.
1 Select “Antenna System”.
2 Press [2, 1] to select antenna system.
• One LNB
Compatible with Single LNB.
• MiniDiSEqC
Up to 2 LNBs can be controlled.
•DiSEqC1.0
Up to 4 LNBs can be controlled.
• Single Cable
Compatible with single cable router.
• This unit supports DiSEqC Version 1.0.
LNB Configuration
You can set LNB setting and User Band when
necessary.
• If you do not know the connected satellite,
select “No Satellite” in “Satellite”. (Available
satellite will be searched in Auto Setup.)
• If you select “User defined” in “Satellite”, set
“Test Transponder Frequency” manually.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
HDD / USB HDD
Settings for Recording
Timer Record Start Buffer
This function sets the timer recording to start
earlier than the TV Guide time.
Timer Record Stop Buffer
This function sets the timer recording to stop
later than the TV Guide time.
REWIND LIVE TV
Turn on/off the REWIND LIVE TV function.
• When “Automatic Standby” is set to “Off”
(> 84), “On” cannot be selected.
Recording for Encrypted Channel
The function allows you to change the
recording limitation on the encrypted
programme. (> 31)
• “Automatic” and “Encrypt Recording” cannot
be selected in the following cases.
- “One cable” has been selected in “Easy
Setting” or “Auto Setup”. (> 19, 75)
- “Single Cable” has been selected in
“Antenna System” and one user band is
disabled. (> left, 21)
PIN Entry for Decrypt Recording
If your CAM requires a PIN for timer
recording, it can be entered here in advance.
DMR-HST230_130EG_eng.book 77 ページ ２０１３年７月８日 月曜日 午後５時４５分