Operating Instructions

Convenient functions
VQT4W80
79
Picture
Still Mode
Select the type of picture shown when you pause
play.
•Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
•Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” during
AVCHD playback.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- File Conversion (> 47)
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
•On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
•Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting when the signals
have a sampling frequency of over 96 kHz.
Dolby Digital / Dolby Digital Plus
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
• When using the DIGITAL AUDIO OUT terminal, there
are following restrictions on Dolby Digital / Dolby
Digital Plus.
- When “Bitstream” is selected, Dolby Digital Plus
audio is output as Dolby Digital.
- When “PCM” is selected, audio is output as
Down-mixed 2ch PCM.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in the following
cases.
- Timer recording (> 33)
- File Conversion (> 47)
DMR-HST230_130EG_eng.book 79 ページ ２０１３年７月８日 月曜日 午後５時４５分