Operating Instructions

Troubleshooting
VQT4W80
95
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (> 17, 20)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (> 73, 83)
- Resolution Setting for DLNA (> 73, 83)
To return all the settings to the factory preset
Perform “Shipping Condition” or “Default
Settings”. (> 73, 85)
Network
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following titles may not be played back:
- A title with access restriction
- A title with contents protection (> 13)
- A title with incompatible format
- An encrypted title ( )
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While simultaneously copying and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
• You cannot play back simultaneously from two
or more items of DLNA compatible equipment.
• If the DLNA compatible equipment is not
capable of outputting HE-AAC audio format,
etc., sound may not be played back.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
• Use 802.11n (2.4 GHz or 5 GHz) Wireless
router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
• On the “Wireless Settings” screen (> 81), the
continuous lighting of at least four “Reception”
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the “Easy Network Setting” (> 20, 81)
again.
Reset
DMR-HST230_130EG_eng.book 95 ページ ２０１３年７月８日 月曜日 午後５時４５分