Operating Instructions

Getting started
TQBS0037
17
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C]: indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T] ([DVB-T2]): indicates features applicable
to digital terrestrial broadcasts (DVB-T).
[Switchover from DVB-T to DVB-T2 is
scheduled. (Germany only)]
• This unit can receive only one of the two
services at a time.
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3 Select language, then press [OK].
4 Select country, then press [OK].
5 Set “TV Signal Selection”.
• Select “Digital Cable Channels” or “Digital
Terrestrial Channels”, then press [OK].
8 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
[UBC80]
Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
1 [DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
We recommend selecting “Preset
Channel Number”.
• For Switzerland:
We recommend selecting “Operator’s
Channel Number ( LCN )”.
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (> 86)
• If channel is not found, restart Auto Setup in Basic
Settings menu. (> 86)
• Switchover from DVB-T to DVB-T2 is scheduled.
After switchover to DVB-T2, perform Update
Channel List to update channels. (Germany only)
2 [DVB-C]
Select “Start Auto Setup”, then press
[OK].
• Scan Mode
Quick
Full
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
•Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6 Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
7 Clock will be set automatically.
If the clock setting screen appears, set the
time manually (> 98, Clock).
DMR-UBC&UBS80EG_eng.book 17 ページ ２０１８年５月２８日 月曜日 午後３時１５分