Operating Instructions

Getting started
TQBS0037
9
CI (Common Interface) module
Encrypted programmes and broadcasts cannot be viewed with the unit by using standard
connections and settings. An appropriate CI module is required to view or record them.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a
subscription with the corresponding broadcaster.
• If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.
CI modul e
This unit allows you to record/view/play an encrypted programme when automatic decryption is
enabled. (Recording may not be possible, depending on the broadcaster.)
See “Notes for recording of an encrypted broadcast”. (> 35)
[UBC80] [DVB- T 2]
To view freenet TV (Germany only)
freenet TV provides pay television broadcasting services for DVB-T2.
Some freenet TV broadcasts and programmes may be encrypted. A supported CAM and a separate
subscription are required to view them. Refer to the website of freenet TV for more details.
• Turn off the unit before you insert or remove the CI module.
• Insert the CAM and the Smart Card with the correct direction.
• Point the CI module at the front side of this unit, and insert it carefully.
• For more details, see the manual of the CAM and Smart Card, or consult the dealer.
Insert the CI module into the CI slot of this unit.
CI slot
This unit
Smart Card
CAM (CI module)
DMR-UBC&UBS80EG_eng.book 9 ページ ２０１８年５月２８日 月曜日 午後３時１５分