Operating Instructions
DVQX1721 (ENG)
8
Charging the Battery
≥ Always use genuine Panasonic batteries (DMW-BLJ31).
≥
If you use other batteries, we cannot guarantee the quality of this product.
1 Connect the battery charger and the AC adaptor with the USB
connection cable (C–C).
• Hold the plugs and insert them straight. (Inserting these at an angle may
cause deformation or malfunction)
2 Connect the AC cable (AC mains lead) to the AC adaptor and
then insert into the electrical outlet E.
• Do not use any other AC cables (AC mains leads) except the supplied one.
• The AC cable (AC mains lead) is dedicated for this unit. Do not use it with
other devices.
3 Insert the battery.
• Insert the terminal end of the battery and push.
• The [CHARGE] lamp F blinks and charging begins.
∫ [CHARGE] Lamp
A Battery charger C AC adaptor (supplied)
B USB connection cable (C–C) (supplied) D AC cable (AC mains lead) (supplied)
Charging status
0% to 49% 50% to 79% 80% to 99% 100%
[CHARGE]
lamp
A
Blinking
B Lit C Off
DMW-BTC14_DVQX1721ZB.book 8 ページ 2022年5月30日 月曜日 午後2時58分