Operating Instructions

7
(ENG) DVQX1647
Mounting on and removing from the
digital camera
• Turn off the digital camera and confirm that the digital camera is not
charging. (Mounting the unit onto, or removing it from, the camera while the
power is on may cause trouble and is not recommended.)
1 1Remove the cover for the
battery grip connector on
the digital camera.
2Remove the terminal cap on
the Battery Grip.
3Store the cover for the
battery grip connector in the
terminal cap.
• Store in the same orientation as the
mark (A).
4Store the terminal cap in the
storage compartment of the
Battery Grip.
• Return the cover for the battery grip
connector and the terminal cap to their
original position after use to protect
the terminals.
2 Insert by aligning the
attachment screw, electrical
contacts, and camera
attachment pins.
3 Turn the attachment screw in
direction of the arrow to
attach securely.
Note
• Keep the terminal cap out of reach of children to prevent swallowing.

DMW-BGS1_DVQX1647ZC.book 7 ページ ２０２２年３月１０日 木曜日 午後４時５８分