Operating Instructions

ENGLISH
9
(ENG) DVQX2102
Charging the Battery
0 Always use genuine Panasonic batteries (P6, P7, P8).
0 If you use other batteries, we cannot guarantee the quality of this product.
1 Connect the charger and the AC adaptor with the USB connection
cable.
0
Hold the plugs and insert them straight in or pull them straight out.
(Inserting these at an angle may cause deformation or malfunction)
2 Connect the AC cables (AC mains leads) to the AC adaptor and
then insert into the electrical outlet E.
0
The AC cable (AC mains lead) is dedicated for this unit. Do not use it with
other devices.
3 Insert the battery.
0
Insert the battery with its terminals facing down
and push.
0 The [CHARGE] light F blinks and charging
begins.
0 When the battery is inserted while the charger is
not connected to the power source, the charging
light turns on for a certain period to allow you to
confirm the battery level.
∫ [CHARGE] Light Indications
0 After charging, disconnect the power source connection and remove the battery.
A Battery charger C AC adaptor (supplied)
B USB connection cable (supplied) D AC cable (AC mains lead)
(supplied)
Charging
status
0% to 49% 50% to 79% 80% to 99% 100%
[CHARGE]
light
A Blinking B On C Off







 


DMW-BTC15-DVQX2102ZA.book 9 ページ ２０２２年７月２６日 火曜日 午後６時４７分