Operating Instructions

VQT4V83 (ENG)
14
3 Insert the silica gel (supplied).
•
If the air temperature is high and the water temperature is low,
condensation may appear inside the Case. To prevent condensation,
insert silica gel (supplied) inside the Case in advance. To prevent the
Case from becoming fogged up, insert the silica gel about 1 to
2 hours before using the Case.
• Always use new silica gel.
• When inserting the silica gel, bend it as shown in the illustration
below and then insert it as far as possible. If you close the Case with
the silica gel not fully inserted, the silica gel will get caught in the O-
ring causing water leakage.
4 Close the buckle.
Silica gel
Digital Camera
Silica gel


DMW-MCFT5_PP&E-VQT4V83.book 14 ページ ２０１３年１月１６日 水曜日 午前１１時３５分