Operating Instructions

VQT4V83 (ENG)
16
Taking Pictures
∫ Be sure to check the following before entering the water
Check the following before diving.
• Is there sufficient remaining battery power?
• Is there sufficient memory in the card?
• Is the O-ring fitted evenly into the O-ring groove?
• Have you checked that no water leaks into the Case?
• Is the buckle closed firmly?
∫ Taking pictures
1 Turn the camera on.
2 Set to the [Advanced Underwater Mode].
3 Aim the AF area on the LCD monitor at the subject you
want to focus on.
4 Fix the focus and take the picture.
Notes
• If there are any particles floating in front of the camera, it may focus on them
instead of the subject.
• If there are drops of water or dirt sticking to the front glass, you may not be able to
focus properly. Be sure to wipe the front glass before taking pictures.
• Sound cannot be recorded correctly when recording motion pictures.
For details of [Advanced Underwater Mode] setting or fixing the focus, refer
to the operating instructions of the digital camera.
DMW-MCFT5_PP&E-VQT4V83.book 16 ページ ２０１３年１月１６日 水曜日 午前１１時３５分