PRESSURE SENSOR DIGITAL PRESSURE SENSOR DP-100 SERIES Conforming to EMC Directive UL recognition pending A New Global Standard Dual display for the digital pressure sensors of the future 10/2006
m Industry first. Dual 3-color display makes operation easier! The dual display means that the ‘current value’ and the ‘threshold value’ can be displayed at the same time to improve ease of operation and visual checking. Introducing a new standard in digital pressure sensor technology. m As of November 2005 and based on research conducted by SUNX for 30 mm 1.181 in square sized digital pressure sensors.
Dual Display Direct setting Current value Threshold value Dir ns tting m t se ea ec Works like a dial control type sensor Main display Comparative Output 1 operation indicator Comparative Output 2 operation indicator Multi-function type: Analog voltage output opertaion indicator Sub display Mode selection key Decrement key Increment key 10/2006 2
Copy function lets work be carried out accurately and quickly Copy function reduces man-hours and human error Sensors can be connected to a master sensor one by one, and a copy of the setting details for the master sensor can be transmitted as data to the other sensors. If making the same settings for multiple sensors, this prevents setting errors from occurring with the other sensors and also reduces the number of changes required to instruction manuals when equipment designs are changed.
Setting is smooth and easy The sensor’s setting operation mode has a 3-level configuration to suit the frequency of use. The setting levels are clearly separated into ‘RUN mode’ for operation settings that are carried out daily, ‘MENU SETTING mode’ for basic settings, and ‘PRO mode’ for special and detailed setting. These make setting operations easy to understand and easy to carry out.
Full range of performance and functions in a compact body All models in the line-up are compound pressure types No sensor settings are required to switch between positive pressure and negative pressure, so that the number of registered part numbers can be decreased. Realizes high performance Low pressure type The low pressure type displays measurements in 0.1 kPa at a resolution of 1/2000 and has a response time of 2.5 ms (variable up to 5,000 ms), 0.5 % F.S. temperature characteristics and 0.1 % F.S.
Switching is possible between analog voltage output and external input Multi-function type Multi-function type is available that allows selection of analog voltage output or external input (auto-reference / remote zero-adjustment). This is suitable for multi-specification applications. Comparative output Analog voltage output or Select External input Multi-function type ANALOG lights up Low pressure type: 1 to 5 V High pressure type: 0.
Other useful functions Sub display can be customized Setting details can be understood at a glance The sub display can be set to indicate any other desired values or letters apart from the threshold value. This eliminates the need for tasks such as affixing a label to the device to indicate the normal pressure value. The DP-100 setting details appear in the digital display.
Installation is also easy! Tight installation to panels is possible An exclusive mounting bracket that is suitable for 1 to 6 mm 0.039 to 0.236 in panel thickness is available. Takes up much less space Front protection cover available Tight installation is possible MS-DP1-3 A single mounting hole! ● An exclusive mounting bracket (MS-DP1-1) that supports tight installation is available Space savings can also be obtained if an L-shaped mounting bracket is used.
ORDER GUIDE Type Appearance Rated pressure range Asian For high pressure For high pressure European North American For high pressure NPN open-collector transistor M5 female thread PNP open-collector transistor For high pressure 100.0 to 100.0 kPa DP-101A-E-P 0.100 to 1.000 MPa DP-102A-E-P 100.0 to 100.0 kPa DP-101-N NPN open-collector transistor For low pressure DP-101-N-P PNP open-collector transistor 0.100 to 1.
DP-100 SPECIFICATIONS Standard Item Model No. Type Multi-function For low pressure Asian European North American (Note 2) For high pressure Set pressure range For high pressure DP-101 DP-102 DP-101A DP-102A DP-101-E-P DP-102-E-P DP-101A-E-P DP-102A-E-P DP-101-N(-P) DP-102-N(-P) DP-101A-N(-P) DP-102A-N(-P) Type of pressure Rated pressure range For low pressure Gauge pressure 100.0 to 100.0 kPa 100.0 to 100.0 kPa 1.020 to 1.020 kgf/cm2 1.000 to 1.000 bar 14.50 to 14.
DP-100 I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram Color code of connector attached cable 1 D Sensor circuit Terminal arrangement diagram Terminal No. Standard type 2 Tr1 ZD1 3 Tr2 (Brown) V (Black) Load Comparative output 1 Load 100 mA max. (White) Comparative output 2 12 to 24 V DC 10 % 1 2 3 4 100 mA max.
DP-100 PRECAUTIONS FOR PROPER USE • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet regulations and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • The DP-100 series is designed for use with noncorrosive gas. It cannot be used with liquid or corrosive gas.
DP-100 PRECAUTIONS FOR PROPER USE PRO mode Table of codes 2nd digit Code • If the mode selection key is pressed and held for 5 seconds in RUN mode, the mode will switch to PRO mode. • If the mode selection key is pressed while a setting is being made, the mode will switch to RUN mode. In this case, the settings that have been changed will be entered.
DP-100 DIMENSIONS (Unit: mm in) MS-DP1-1 The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ Sensor mounting bracket (Optional) Assembly dimensions "2.3 "0.091 9.5 14.5 0.571 0.374 4.2 0.165 t2 t 0.079 20 0.787 2-R2.1 R0.083 9.5 0.374 14.5 0.571 1 0.039 4.2 0.165 2-R2.1 R0.083 22 0.866 25.5 1.004 42.5 1.673 30 1.181 20 0.787 13 0.512 R13 20 0.787 R0.512 22 0.866 2-"3.5 "0.138 9.5 0.374 7.5 0.295 45 1.772 ( 30 1.181 45 1.772 ) 5.3 0.209 44 5.5 1.
Compact Size • 2-color Digital Display DP4 SERIES New shape makes it most suitable for panel installation Light-weight, compact design Bright, easy to view twocolor digital display A compact form specifically designed for mounting on an equipment panel. It only uses half the space of our conventional product and provides the lightest weight of just 30 g (cable excluded). The digital display is a large, easy-to-view, and two-color digital display.