Datasheet

No.CE-DP100-10 January, 2006
2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
486-0901, Japan
Phone: [phone]
FAX: [phone]
SUNX Limited
Phone: [phone]
FAX: [phone]
Overseas Sales Dept.
Printed on 100% recycled paper PRINTED IN JAPAN
http://www.sunx.co.jp/
All information is subject to change without prior notice.
Compact Size • 2-color Digital Display
DP4 SERIES
New shape makes it most suitable for panel installation
Light-weight, compact
design
A compact form
specifically designed
for mounting on an
equipment panel.
It only uses half the
space of our conven-
tional product and
provides the lightest
weight of just 30 g
(cable excluded).
Bright, easy to view two-
color digital display
The digital display is a large, easy-to-view,
and two-color digital display. It is also
functions as an output indicator as it
changes from green to red color when the
output turns ON, enabling you confirm the
output status at a glance.
Supplied with a simple-to-
mount panel mounting bracket
A panel mounting bracket (MS-DP-1) is
enclosed to enable simple mounting of the
sensor onto the panel surface, thus
contributing to the total cost reduction.
40mm
60mm
Conforming to
EMC Directive
UL Recognition
Rated pressure range: DP4-50/50P 0to 101.3 kPa
DP4-52/52P 0 to 1.000 MPa
DP4-57/57P
100.0 to 100.0 kPa
Applicable fluid: Non-corrosive gas
Supply voltage: 12 to 24 V DC %
Output: DP4-5 NPN open-collector transistor
DP4-5P PNP open-collector transistor
Pressure port: M5 female thread
Dimensions: W40
H20D49 mm
10
15
Head-separated Type • 2-color Digital Display
DP5 SERIES DPH SERIES
Sensor head Controller
1/1,000 second high-speed response!
Response time 1 ms
Mounting the detachable head close to the
detecting section minimizes piping and
enables response time of 1 ms, as well as
greatly decreasing tact time delay. In
addition, the ultra-small and light-weight
design of the head means it can easily be
mounted on moving sections.
Sensor head with operation
indicator
The sensor head is also equipped with
operation indicator. Output
ON / OFF can be checked
on the sensor head, so
that it is suitable for
checking operation at the
suction head.
Note: An intermediate cable is required to connect
the controller and the sensor head. Please
order the intermediate cable with connector
separately.
Independent use of sensor
head possible
Light-weight, compact
design
The controller inherits its lightweight,
compact design from the popular DP4
series of digital pressure sensors. Control
panel setup is low cost and requires
minimal space.
Convenient intermediate
cable with connector
Intermediate cable with connectors for
connecting the sensor head and the
controller makes operation and
maintenance easier.
Conforming to
EMC Directive
UL Recognition
Pressure sensor heads
Rated pressure range: DPH-A0 0 to 101.3 kPa
DPH-A2 0 to 1.000 MPa
DPH-A7 100.0 to 100.0 kPa
Applicable fluid: Non-corrosive gas
Supply voltage: 12 to 24 V DC %
Analog voltage output: 1 to 5 V
(over rated pressure range)
Pressure port: DPH-A0 M5 male thread,
DPH-A1 R (PT)
1
/8 male thread / M5 female thread
DPH-A2 NPT
1
/ 8 male thread / 10-32UNF female thread
DPH-A30 10-32UNF male thread
Dimensions: DPH-A0/A30 12.5
2520 mm
DPH-A1/A2 12.5
2525 mm
10
15
Pressure sensor controllers
Applicable pressure sensor head: DPH-A
Rated pressure range:
Vacuum pressure 0 to
101.3 kPa
Positive pressure 0 to 1.000 MPa
Compound pressure 100.0 to 100.0 kPa
Supply voltage: 12 to 24V DC %
Comparative Output (Comparative output 1, Comparative output 2):
DP5-C NPN open-collector transistor
DP5-C-P PNP open-collector transistor
Analog voltage output: 1 to 5 V DC (over rated pressure range)
Dimensions:
W40

H20

D43 mm
10
15
10/2006