Datasheet

Details copied
Details transmitted
Details received
5 minutes
approx.
Sensor setting time:
5 minutes 20 seconds approx.
Sensor setting time:
20 seconds approx.
3
Copy function reduces man-hours and human error
Sensors can be connected to a master sensor one by one, and a copy of the
setting details for the master sensor can be transmitted as data to the other
sensors. If making the same settings for multiple sensors, this prevents setting
errors from occurring with the other sensors and also reduces the number of
changes required to instruction manuals when equipment designs are
changed.
Copy function lets work be carried out accurately and quickly
Setting man-hours are reduced and sensor setting time is shortened.
1
Advantage
Setting details can be copied.
5 minutes
approx.
5 minutes
approx.
5 minutes
approx.
5 minutes
approx.
Sensor setting time:
20 minutes approx.
1st equipment:
Master
sensor
1st equipment:
2nd equipment:
3rd equipment:
4th equipment:
2nd equipment:
3rd equipment:
4th equipment:
Previously
DP-100, 1st line DP-100, 2nd line
20 minutes
approx.
1st equipment:
2nd equipment:
3rd equipment:
4th equipment:
20 minutes
approx.
Number of pressure sensor: For 1 per equipment and 4 per line
Human operating error is reduced.
2
Advantage
Copying via wiring
V
0 V
Comparative output 1
Comparative output 2
V
0 V
Comparative output 1
Comparative output 2
Power supply
Slave sensorMaster sensor
The setting details for the master sensor are
retained, so continuous copying is possible!
For 2nd and subsequent lines, only the data
transmission time is needed.
 Because all details are copied automatically, it prevents problems occurring as a result
of human error.
 Instruction manuals can be updated easily when changes occur to equipment design!
10/2006