Digital Color Imaging Systems Operating Instructions

85
Chapter 2 More Menus Features
Copying Inverse Image
The tonal inversion of image can be copied in black and white.
z This function is only available when “Black” is selected in the Color mode. If the “Inverse” is selected when the
other Color mode has been set, a message appears prompting you to change the setting to “Black”.
z This function is canceled if the Color mode is changed from “Black” to the other Color mode after selecting
“Inverse”.
z The Color mode remains set to “Black” even if the Inverse mode is canceled. To cancel the “Black” mode,
select other Color mode or press the Reset key.
1 Place original(s).
z Refer to Placing Originals (see page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select “More Menus”.
4 Select “Zoom / Effects”, and then
select “Inverse”.
5 Enter the desired number of copies.
6 Press the Start key.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.