Owner's manual

37
Chapter 2 Basic Fax Transmission
To send documents using memory transmission, follow the steps below. (This is an example when the
direct transmission is set as default in the Function Parameters.)
1 Place Original(s).
z Refer to Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions
(For Basic
Operations) of provided booklet.
2 Press the Fax key.
3 Select “Basic Menu”.
4 Select “Memory”.
5 Set “Quality Adj.” as required.
z Refer to Setting Original Quality (see page
26).
6 Select “Address Book”, and then
select a destination.
z Refer to Entering a Destination (see page
16).
7 Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.
z For instructions on how to cancel a
transmission, refer to Canceling a
Communication (see page 48).