Operating Instructions - Copying

45
Chapter 2 More Menus Features
Copying Special Originals (Thin Paper, etc.) from the ADF
 SADF
This mode adds a 5 second delay to allow another original to be placed on the ADF. Special originals
(like thin paper, etc.) can be fed from the ADF and copied continuously using the SADF Mode.
1 Place one original (minimum 50 g/m
2
)
on the ADF.
2 Press the Copy key if set in other
function mode.
3 Select “More Menus”.
4 Select “2-Sided/Original->Copy”, and
then select “Job Build and SADF”.
5 Enter the desired number of copies.
6 Press the Start key.
7 Place the next original within 5 sec. of
last ejected copy.
8 After the last page is scanned, select
“No” in the confirmation screen.