Digital Colour Imaging Systems Operating Instructions (For Facsimile and Internet Fax) Model No. Before operating this machine, please read this manual completely and keep this manual for future reference. (Illustration shows optional accessories that may not be installed on your machine.
DP-C262/C322 Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manualand keep all manuals for future reference. If you lose the manual, contact the authorized Panasonic dealer. Operating Instructions (For Setting Up) This manual contains essential information for setting up the machine. Accessories Operating Instructions (For Basic Operations) This manual contains essential information for proper operation of the machine.
Conventions Icons The following icons are used in this manual. Icon Description Indicated important information that must be read in detail. NOTE Indicates reference Information. Notation The following notations are used in this manual. Notation For Keys and Buttons Description Hard buttons on the Control Panel are depicted as **** key, soft buttons on the Touch Panel display are shown as “xxx”. Ex: Press the Start key and select “More Menus”.
Table of Contents Chapter 1 Getting to Know Your Machine Menu Map.............................................................................................................................. 10 Chapter 2 Basic Fax Transmission Fax Transmission Procedure................................................................................................. 14 Entering a Destination ........................................................................................................... 16 Manual Dialling.......
What is Confidential Communication?..............................................................“Mail Box” 56 Confidential Transmission ................................................................................................. 57 Confidential Polling............................................................................................................ 58 Storing Documents for Confidential Polling .......................................................................
Message Delivery Notice (MDN) ....................................................................................... 93 Direct Internet Fax Transmission (Using Direct SMTP) .................................................... 94 Tips for Internet Fax .............................................................................................................. 96 Preparing to Use Internet Fax ...............................................................................................
Requesting a Relayed Transmission from a Computer................................................... Convenient Application Software..................................................................................... Result of Relayed Transmission .......................................................................................... Useful Terms to Remember................................................................................................. DHCP (Dynamic Host Configuration Protocol) .......
Printing Address Book List .............................................................................................. 190 Reading Address Book List ............................................................................................. 191 Program List ................................................................................................“Program List” 192 Printing Program List.......................................................................................................
Memo 9
Chapter 1 Menu Map Getting to Know Your Machine Chapter 1 The main screen and menu of the fax feature are as follows: Basic Menu: See page 11. More Menus: See page 12. Address Book Screen Redial: See page 23. Getting to Know Your Machine Monitor: See page 24.
• File Type and Name (Setting a File Type and a Filename: See page 114) • Original Size (Setting the Original Size: See page 30) • 2-Sided Original (Transmitting 2-Sided Originals: See page 32) • Verification Stamp (Verification Stamp: See page 34) • Memory (Transmitting a Document Stored in Memory: See page 36) • Direct (Direct Transmission: See page 38) • Comm.
More Menus > Advanced Comm. Screen Chapter 1 Getting to Know Your Machine • Deferred Comm. Transmit (Deferred Transmission: See page 48) Polling (Deferred Polling: See page 50) • Polling Polling (Polling: See page 52) Polled (Storing Documents to Be Polled: See page 54) • Advanced Comm.
More Menus > Edit File Mode Screen Chapter 1 • Delete File (Deleting a Communication Reservation File: See page 158) • Add Document (Adding Documents to a Communication Reservation File: See page 160) • Change Time/Stn (Editing Communication Reservations: See page 156) • Print File (Printing a Communication Reservation File: See page 159) • Retry Incomp.
Chapter 2 Fax Transmission Procedure Chapter 2 The basic procedure of transmitting a fax on this machine is as follows: 1 Place original(s). Select “Basic Menu” if additional settings are required. Used memory Basic Fax Transmission Face Up. Up to 70 sheets (80 g/m2). z Setting Original Quality. (See page 26). z Setting the Original Size. (See page 30). z Transmitting 2-Sided Originals. (See page 32). Face Down. Align with the top left corner. Close ADF.
3 Enter the fax number from the keypad or select a destination. z When copying from the Platen Glass, place the next original and follow the instructions displayed on the touch panel display. z A communication journal is printed if the transmission fails (Ex: Remote station is busy). z Refer to Entering a Destination. (See page 16). 4 Press the Start key. z If the line is busy, the number is automatically redialed. The call waiting message appears on the display while in auto-dialling.
Entering a Destination Chapter 2 Stations can be entered by using the following methods or a combination of these: Manual Dialling Enter the telephone number directly. (see page 16) Using the Address Book Use the pre-programmed Address Book. Use a Key Name. (See page 18) Search through “Favourites”. (See page 18) Basic Fax Transmission Use Group Dialling.
Number Pad Screen Using “Pause” Ex: Enter 9 for the outside access number, select “Pause”, and then enter the fax number. Inserts a pause each time it is selected. The pause is represented by a “-” symbol. Chapter 2 z If you are using a PBX, enter the external access number first, and then select “Pause” before entering the fax number. Pause symbol z Change dialling method from pulse to tone dialling at a desired dialling moment. Switching to tone dialling is represented by a “/” symbol.
Using the Address Book Chapter 2 Use a Key Name Search through the “Favourites” If a destination is registered in the address book, it can be selected by using a Key Name. If a destination is registered as a Favourite when in the address book, it can be selected using the “Favourites” tab. z The fax numbers must be pre-programmed into the address book. Refer to Adding a Fax Number into the Address Book. (See page 163). Basic Fax Transmission 1 2 3 Follow the step 1 and 2 on page 14.
Use Group Dialling z The group dialling button must be preprogrammed. Refer to Setting for Group Dialling. (See page 173). 1 2 Select “Program/Group”. Select the button for the desired destination group. Basic Fax Transmission 3 Follow the step 1 and 2 on page 14. Chapter 2 For transmission to multiple destinations using group dialling, follow the steps below: z To cancel the choice, select the same destination again. 4 Press the Start key.
Searching for a Destination Chapter 2 Search through the Address Book (Local Search) Select “Search” to look through the address book for the desired destination by the entry name. z Select “Global” to search fax numbers or Email addresses in the LDAP Server. (See Next Page) z This feature is available in certain countries only. Basic Fax Transmission 1 2 3 Follow the step 1 and 2 on page 14. Select “Search”. Enter the first letter you want to search for.
Search through the LDAP Server (LDAP Search) Select “Global” on the displayed screen to use the LDAP search feature. Contact your network administrator to check whether the LDAP search feature is available in your particular environment. The LDAP server must be configured before its use. For more details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 3 Follow the step 1 and 2 on page 14. Select “Search”.
5 Select “Fax Number” to display a list of destinations. Chapter 2 Basic Fax Transmission 6 Choose a destination, and then select “OK”. z Only one destination can be selected. z You can change the entry screen by selecting “Email” or “Fax Number”. z Select or to scroll the search results. z Select “Detail” to open a more detailed information screen. Select “Close” to exit to the failed information screen. z To cancel the search operation, select “Cancel”.
Redialling To redial the most recently dialled number, follow the steps below: 4 Select “Redial”. Confirm that this is the fax number that you want to send to, and then select “OK”. Basic Fax Transmission 3 Follow the step 1 and 2 on page 14. Chapter 2 1 2 Press the Start key. z The original(s) are stored into memory with a file number. Then starts dialing the telephone number.
Transmission with Destination Monitoring Chapter 2 Basic Fax Transmission 24 Select “Monitor” on the touch-panel screen to obtain a dial tone. This feature is called “on-hook dialling.” To monitor the status of a remote station, follow the steps below: 1 Place Original(s). z If the platen is used, only one page can be transmitted at a time. Raises the monitor volume. z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations)of provided booklet.
If an external telephone is connected to your machine, you can send a fax after talking to the remote party on the phone. Follow the steps below: 1 Place Original(s). z If the platen is used, only one page can be transmitted at a time. 2 3 Press the Fax key. Lift the handset of the external telephone. 5 6 Dial the telephone number using the keypad. Talk to the remote party, and then tell the other party to get ready for receiving fax.
Setting Original Quality Chapter 2 Original Type Original type can be specified to suit your needs, you can select from, text-only original, photo-only original or original in which text and photos are mixed. Select “Text/Photo” when text and photos are mixed on a single page or are mixed on multiple pages to be sent. Text-only original Photo-only original Original in which text and photos are mixed Basic Fax Transmission Density Choose a density to suit your originals.
1 Place Original(s). Original Type 2 3 Press the Fax key. Select for originals in which text and photos are mixed. Select “Basic Menu”. Chapter 2 Select for text-only originals. z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. Select for photo-only originals. 4 Density Select “Quality Adj.”. If you wish to scan a original with lighter contrast, select the button to reduce the contrast level.
Resolution Chapter 2 Select for ordinary originals. Select for originals containing small characters or graphics. Basic Fax Transmission Select for fine originals containing detailed drawings or text. z The finer a original to be scanned, the more information needs to be transmitted, thus, requiring a longer communication time.
Memo Chapter 2 Basic Fax Transmission 29
Setting the Original Size Chapter 2 The Original Size is usually detected automatically when an original is placed on the platen. If the size is not detected automatically, or you would like to change the detected size, you can set the original size manually by following the procedure below. Original size is not auto detected. Original size is not detected correctly. Basic Fax Transmission Original icon is not displayed. Detected Size This feature does not work when a original is loaded on the ADF.
5 Choose the original size, and then select “OK”. B4 A4 A5 A5-R 6 Set “Quality Adj.” as required. z Refer to Setting Original Quality. (See page 26). 7 Select a destination. Basic Fax Transmission A4-R Chapter 2 A3 z Refer to Entering a Destination. (See page 16). 8 Press the Start key. The original(s) are stored into memory with a file number. Then starts dialling the telephone number.
Transmitting 2-Sided Originals Chapter 2 2-sided originals loaded in the ADF are scanned automatically with a specified biding edge position and transmitted. Two binding edge selections are available: • Long Edge: 2-sided scanning is aligned to the long edge of the original. • Short Edge: 2-sided scanning is aligned to the short edge of the original. Long Edge Short Edge Basic Fax Transmission z This feature works only when originals loaded in the ADF.
5 Select a binding position, and then select “OK”. 6 Set “Quality Adj.” as required. z Refer to Setting Original Quality. (See page 26). 7 Select a destination. Basic Fax Transmission Select when the binding position is on the short side of the original. Chapter 2 Select when the binding position is on the long side of the original. z Refer to Entering a Destination. (See page 16). 8 Press the Start key. The original(s) are stored into memory with a file number.
Verification Stamp Chapter 2 This function confirms successful transmission or storage into the memory by stamping at the bottom of each successfully transmitted original(s) with a small “x” mark. Ex: Scanning Direction Verification Stamp Basic Fax Transmission z The setting of the verification stamp can be changed with “04 Stamp (HOME)” in Function Parameters (Fax/ Email Settings> Fax Parameters).
Memo Chapter 2 Basic Fax Transmission 35
Transmitting a Document Stored in Memory Chapter 2 Documents can be quickly scanned and stored in the memory before transmission. This feature allows you to send the documents to multiple destinations without having to scan the same documents over again. It also allows you to retrieve your original(s) immediately without having to wait for the fax transmission to complete. In addition to the memory transmission, the machine supports the direct transmission feature.
To send documents using memory transmission, follow the steps below. (This is an example when the direct transmission is set as default in the Function Parameters.) Place Original(s). 6 Select a destination. z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 Press the Fax key. Chapter 2 1 Select “Basic Menu”. 7 Press the Start key. The original(s) are stored into memory with a file number.
Direct Transmission Chapter 2 Documents can be transmitted immediately on scanning without storing into memory. Direct transmission is more convenient in situations as shown below: When you want to send the documents right away. When you want to send a large amount of documents. Document(s) Basic Fax Transmission To a single destination Memory z Direct transmission cannot be used to send documents to multiple destinations.
6 Select a destination. Chapter 2 7 Press the Start key. Transmission starts immediately on scanning. z For instructions on how to cancel transmission, refer to Cancelling a Communication. (See page 46). Basic Fax Transmission z Refer to Entering a Destination. (See page 16).
Verifying Communication Status Chapter 2 To verify the communication status, follow the steps below: 1 2 Basic Fax Transmission 3 4 40 Press the Fax key. Select “Basic Menu”. Select “Comm. Status” while the call session is in progress. Verify the communication status. 5 When the verification is completed, select “OK”.
Memo Chapter 2 Basic Fax Transmission 41
Rotated Transmission Chapter 2 If an A4/Letter-sized document is loaded in a portrait position, it could be interpreted as an A3/Ledger size on the receiving station. To avoid this misinterpretation, the machine is configured to support rotated transmission. Set “78 Rotation XMT” to “Valid” in Function Parameters (Fax/Email Settings> Fax Parameters).
Batch Transmission There are two types of batch transmissions available: • Real Time Batch Transmission: During the memory transmission, your machine searches its memory for reserved files (up to 4 files) to transmit to the same destination, and automatically batches, and then transmits them in a single call. • Delayed Batch Transmission: This feature requires the scheduling of the time for the batch transmission into a Program key in advance.
Chapter 2 Getting an Outside Line Using PIN Code Access If your PBX requires a PIN (Personal Identification Number) Code to access an external line, your machine can be set to prompt the user to enter the PIN Code before dialling. This function is available when “39 PIN Code Access” in Fax/Email Settings> Fax Parameters is set to “Suffix” or “Prefix”. When “39 PIN Code Access” is set to “Prefix”, the dialling procedure is as follows. (Available for some countries only.
Using Program Keys Program dialling does not only simplify repetitive or complex operational sequences but also prevent operator errors. To use a program key, follow the steps below: z To use this feature, the operating sequence must be programmed onto the button in advance. Refer to Setting for Program Dialling. (See page 171). 1 Place Original(s). z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 4 Press the Fax key.
Cancelling a Communication Chapter 2 To cancel a communication, follow the steps below: Basic Fax Transmission 3 46 To Cancel Memory Transmission: 1 2 4 Press the Fax key. Press the Stop key while the communication is in progress. Select “Yes” to stop a communication. Select “Yes” to print a communication journal or “No” if a communication journal is not desired.
To Cancel Direct Transmission: Press the Stop key while the communication is in progress. Select “Yes” to stop a communication. 3 Remove the document.
Chapter 3 Time Controlled Communication (Deferred) Fax Features Chapter 3 Deferred Transmission Time must be pre-programmed in advance to send document(s) to one or multiple destinations at a deferred time within the next 24 hours. The document is scanned, and stored as a reserved document in memory until the pre-programmed time. It will start transmission at the pre-programmed time.
5 Set the deferred time, and then select “OK”. 8 Press the Start key. Document(s) are stored into memory. z If you make a mistake, select “Clear” to delete entries one digit at a time. z A communication journal is printed if the transmission fails for any reason (Ex: Remote station was busy). Refer to Communication Journal. (See page 186) Set “Quality Adj.” as required. z Press Reset key to return the machine to the initial screen of the current active mode. z Set the time in a 24-hour format.
Deferred Polling If Polling is requested with a deferred time, it will start Polling at the pre-programmed time. Chapter 3 Receiver Pre-programmed Communication Time Sender Request to Poll Document(s) Fax Features Memory z Up to 50 built-in timers can be set for deferred communication. z For instructions on how to use polling without a pre-programmed time, refer to Polling. (See page 52) 1 2 3 Press the Fax key. Select “More Menus”. Select “Polling” in “Deferred Comm.
5 If a password is required, enter the password, and then select “OK”. Chapter 3 6 Select a destination. Fax Features z If you have set the polling password in “26 Polling Password” in Function Parameters (Fax/Email Settings> Fax Parameters), the password will appear on the display. You can still change the password temporarily by overwriting it with a new one. z Refer to Entering a Destination. (See page 16) 7 Press the Start key. Polling starts when the pre-programmed time is reached.
Polling Chapter 3 Polling Polling is a process of calling the other station(s) for document(s) retrieval. The other station must know in advance that you will be calling, and must prepare document(s) by storing them into the memory. To ensure security, establish a polling password that is shared by the other station ahead of time. The receiving station initiates the call, therefore, it pays for the communication charges.
5 Select a destination. Chapter 3 6 Press the Start key. Polling starts. Fax Features z Refer to Entering a Destination.
Storing Documents to Be Polled Chapter 3 Polled is the process of automatically transmitting document(s) upon receiving the polling request from the receiving station. First, you must prepare your machine by storing document(s) into memory ahead of time. To ensure security, set the polling password that is shared with the receiving station. The receiving station initiates the call, therefore, it pays for the communication charges.
Chapter 3 z After being polled, the documents stored in the memory will be erased automatically. To retain the documents in memory so that they can be polled repeatedly change by setting “27 POLLED FILE SAVE” to “Valid” in Function Parameters (Fax/Email settings> Fax Parameters).
Using a Mailbox (Confidential Communication) Chapter 3 What is Confidential Communication? The confidential mailbox allows communication with other compatible models using a 4-digit confidential code. The Confidential Mailbox feature receives document(s) with a confidential code in the memory. These documents can only be printed by the person who has the correct confidential code. • A confidential reception report is printed whenever confidential documents are received on the machine.
Confidential Transmission To transmit a confidential document, follow the steps below: 1 Place Original(s). 6 z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. Press the Fax key. Select “More Menus”. If you make a mistake, press Clear key to delete entries one digit at a time. 7 4 Set “Quality Adj.” as required. z Refer to Setting Original Quality. (See page 26) Select “Mail Box”.
Confidential Polling Chapter 3 1 2 Fax Features 3 Press the Fax key. 5 Select “More Menus”. Select “Mail Box”. z If you make a mistake, press Clear key to delete entries one digit at a time. 6 4 Enter the mailbox password (4-digit), and then select “OK”. Select a destination. Select “Polling”. z Refer to Entering a Destination. (See page 16) z Choose the address except registered for Relayed Transmission. 7 Press the Start key. Confidential mailbox polling starts.
Storing Documents for Confidential Polling Place Original(s). z Refer to Placing Originals (Facsimile/ Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 6 Enter the mailbox password (4-digit), and then select “OK”. Press the Fax key. Chapter 3 1 Select “More Menus”. 4 Select “Mail Box”. 5 Select “Polled”. z For instructions on how to delete a confidential document polled for transmission, refer to Deleting a Confidential Document.
Printing a Received Confidential Document Chapter 3 When confidential documents are received, a confidential reception report is printed. This section explains how to read a confidential reception report and print the received confidential documents. z After a received confidential document is printed, it is deleted from the mailbox. z If the machine receives documents having the same password, they are stored into the same mailbox. z Up to 20 mailboxes are available.
Printing a Received Confidential Document To print a received confidential document, follow the steps below: 1 2 Select “More Menus”. Select “Mail Box”. 5 Enter the mailbox password (4-digit), and then select “OK”. The document is printed and deleted from the mailbox. Fax Features 3 Press the Fax key. Chapter 3 z After a received confidential document is printed, it is deleted from the mailbox. z If you make a mistake, select “Clear” to delete entries one digit at a time.
Deleting a Confidential Document To delete a confidential document in a mailbox, follow the steps below: Chapter 3 Fax Features 62 1 2 Press the Fax key. Select “More Menus”. 3 Select “Mail Box”. 4 Select “Delete File”. 5 Enter the mailbox (4-digit) password, and then select “OK”. Documents in the mailbox are deleted. z If you make a mistake, press Clear key to delete entries one digit at a time.
Memo Chapter 3 Fax Features 63
Sub-Address Communication Chapter 3 The Sub-Addressing function allows you further routing, forwarding or relaying of document(s) to the desired destinations when used in combination with Internet Fax. What is Sub-Addressing? Sub-Addressing is a T.30 communications protocol recommended by ITU-T. • A centre machine supporting a memory feature is required on the fax network to implement subaddressed communications. For more details, contact your local authorized Panasonic dealer.
Sub-Addressed Transmission Using Address Book To transmit a document by sub-addressing, follow the steps below: 1 Place Original(s). 5 z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. Press the Fax key. Select “More Menus”. z The sub-address can be up to 20 digits. Fax Features 2 3 Enter a sub-address, and then select “OK”. Chapter 3 z This feature can not be used when dialling from the external telephone.
8 Select a destination. Chapter 3 Fax Features 66 z Refer to Entering a Destination. (See page 16) z Choose the address except registered for Relayed Transmission. 9 Press the Start key. Sub-Addressed transmission starts.
Sub-Addressed Transmission Using Manual Dialling To enter a sub-address directly from the keypad, follow the steps below: z If you use sub-addressed transmission frequently, the sub-address can be pre-programmed into the address book to facilitate future communications. For additional details, refer to Adding a Fax Number into the Address Book. (See page 163) 1 Place Original(s). 6 Enter a sub-address. Press the Fax key. Set “Quality Adj.” as required. z Refer to Setting Original Quality.
Password Communication Chapter 3 What is Password Communication? Fax Features The standard setting of “43 Password-Transmit” is set to “Off” in Function Parameters (Fax/Email Settings> Fax Parameters). To utilize Password XMT, change the default setting to “On”. For instructions on how to change the standard setting, refer to Setting Password-Protected Transmission.
Password Transmission To utilize the password-protected transmission feature, follow the steps below: 1 Place Original(s). 6 Select “On”, and then select “OK”. z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. Press the Fax key. Select “More Menus”. Select to perform Password-Protected Transmission.
Setting Password-Protected Transmission To always utilize password-protected transmissions, follow the steps below: Chapter 3 z You must program a password (4-digit) in advance. 1 Fax Features 2 3 4 Press the Function key to open the Function Parameters screen. 6 Select “40-79”. 7 Select “43 Password-Transmit”. Select “Fax/Email Settings”. Select “04 Key Operator Mode”. Enter the key operator mode Password, and then select “OK”. 8 Enter the password (4-digit), and then select “OK”.
9 Select “On” or “Off”, and select “OK”. Chapter 3 z You can change the setting temporarily by using the “Password XMT “ in the “more menu” for each transmission. (See page 69) Fax Features z Press Reset key to return the machine to the initial screen of the current active mode.
Printing Communication Journal Chapter 3 The communication journal can be printed at the end of each transmission communication. • If the “Comm. Journal” is set to “On” in the “More Menus”, a communication journal is printed at the end of each transmission communication. • For instructions on how to read the communication journal, refer to Communication Journal. (See page 186) ************* - Comm.
1 Place Original(s). 6 2 3 Chapter 3 z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. Select “On”, “Off”, or “Inc Only”, and then select “OK”. Press the Fax key. Select “More Menus”. 4 Select not to print a Communication Journal. Select “Select Mode” Fax Features Select to print a Communication Journal after each transmission. Select to print a Communication Journal only when transmission has failed.
Transmitting a Document with a Cover Sheet Chapter 3 Documents can be transmitted with a cover sheet stating the date and time of the transmission, destination station name, and total number of pages. Sample Fax Cover Sheet ***** Facsimile Cover Sheet ***** dd-MMM-yyyy 15:00 Fax Features Message To: SALES DEPT. Message From: PANASONIC 201 555 1212 01 Page(s) Following This Cover Page z The cover sheet is excluded from the total page count in the transaction journal.
Select “Cover Sheet”. 6 Select “On”, and then select “OK”. 8 Select a destination. Chapter 3 5 9 Press the Start key. The transmission of the document with a cover sheet starts. Fax Features z Refer to Entering a Destination. (See page 16) Select to attach a cover sheet. Select not to attach a cover sheet. 7 Set “Quality Adj.” as required. z Refer to Setting Original Quality.
Chapter 4 Receiving Documents Chapter 4 Fax Reception 76 Fax Reception There are two ways to receive fax calls on this machine. Automatic Reception The machine receives documents automatically. The machine answers all incoming calls (including voice calls). Manual Reception When your telephone rings, lift the handset of the external telephone. If you hear a beep from the phone, it means someone wants to originate a fax call.
Manual Reception • Set “17 Receive Mode” to “Manual” in Function Parameters. Parameters (Fax/Email Settings > Fax Parameters). • When an incoming call is received, lift the external telephone handset. If you hear a beep press from the phone, press the Start key and hang up the handset to start receiving the incoming fax. 1 3 4 If a document is loaded on the ADF, remove it. Fax Reception 2 When your telephone rings, lift the external telephone handset.
Print Reduction and Duplex Recording Chapter 4 Print Reduction This machine can use Letter, Legal, A4, B4 or A3 size plain paper for recording. Sometimes, oversized documents sent to you by the other parties cannot be printed within a single page. If this happens, the document will be divided into separate pages. This machine is equipped with a Print Reduction function to solve this problem. You may select the most appropriate setting described below.
When Print Reduction is Set to “Fixed” Reduced at a specified reduction ratio Long document Reduced at a specified reduction ratio z The standard setting of “25 Reduction Ratio” is set to “100%”. z For instructions on how to change the standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
Substitute Memory Reception Chapter 4 When your machine cannot print an incoming document for some reasons, such as when it runs out of paper/toner, or paper has jammed, the received document is saved in memory automatically. This feature is called “substitute memory reception”. When a received document is saved in memory as substitute memory reception, the message “Message in Memory” appears on the touch panel display.
Convenient Reception Features Selective Reception Your machine has a special feature, Selective Reception, which can prevent receiving of unnecessary documents, (i.e. junk fax, direct mail, etc.).
Fax Forwarding Chapter 4 This feature allows all incoming faxes to be forwarded to the station registered in the address book. It is convenient when you want to receive fax calls at a location away from your office (such as your home) at night, or during holidays. Sender A Receiver Fax Reception Forward Sender B z The standard setting of “54 Fax Forward” is set to “Invalid” in Function Parameters (Fax/Email Settings> Fax Parameters).
Password-Reception Password reception will prevent receiving fax from unauthorized stations. • Password reception can be enabled by programming “44 Password-Receive” in Function Parameters (Fax/Email Settings> Fax Parameters). Refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. Chapter 4 To use Password Reception, you must set a 4-digit receiving password in advance. The password must be shared with the other compatible Panasonic machine(s).
Receive to Memory Chapter 4 What is Memory Reception? Memory reception allows all incoming documents to be stored in memory, instead of printing them onto the output tray. z If the memory reception feature has been set to “On” in Function Parameters, the message Receive to Memory appears on the touch-panel display. z Documents received in memory are printed when the pre-programmed password is entered. The received documents are deleted from memory when their printing completes.
Programming Memory Reception To enable memory reception, follow the steps below: Select “More Menus”. Select “Select Mode”. 5 Select “On”, and then “OK”. Memory reception is programmed. Select to enable memory reception. Select to cancel memory reception. Fax Reception 3 Press the Fax key. Chapter 4 1 2 Select to print a document received in memory. 4 Select “Receive to Memory”.
Printing a Document Received in Memory When a document is received in memory, a message is displayed. Chapter 4 Fax Reception To print a document received in memory, follow the steps below: 1 2 3 Press the Fax key. 5 Select “Print”, and then “OK”. Select “More Menus”. Select “Select Mode”. Select to enable memory reception. Select to disable memory reception. Select to print a document received in memory. 4 86 Select “Receive to Memory”.
6 z If you make a mistake, press Clear key to delete entries one digit at a time. Fax Reception z This screen appears when the password is set in “37 Receive to Memory” in Function Parameters (Fax/Email Settings). Chapter 4 If a password is pre-programmed, enter the password (4-digit), and then select “OK”.
Chapter 5 What is Internet Fax? Internet Fax Chapter 5 What is Internet Fax? It is a feature whereby scanned documents are transmitted to Internet Fax or to computers as Email. Internet Fax communicates via an Intranet, or the Internet without using the telephone line. This machine can be connected to 10Base-T/100Base-TX Ethernet LAN (local area network).
Routing You can forward fax documents or Email to an Internet Fax or networked computers. Transmitting to a Fax via a Relay Station (Relay Transmission) Email can be transmitted as normal fax documents via a relay station. Email may also be broadcasted. Chapter 5 z Refer to Inbound Routing. (See page 91) z Refer to Relay Transmission.
What Internet Fax Can Do Chapter 5 This section introduces the functions of the Internet Fax feature. The Internet Fax features does not only offer sending and receiving Email but forwarding fax documents via a telephone line or broadcasting them via a relay station. Sending Email A scanned document can be transmitted to an Internet Fax or to a remote computer as an Email file attachment.
Receiving Email LAN Chapter 5 When this machine receives Email from an Internet Fax or from a computer, it starts printing the Email automatically. If the Email has an attached file in a format that is not supported by the machine, an error message is printed to alert you that the machine cannot print the Email. Internet Fax z For instructions on how to receive Email, refer to Receiving an Email.
Relay Transmission Chapter 5 The Internet Relayed Transmission Feature can save your time and transmission costs if you need to send the same documents to multiple G3 fax machines. This is especially true if the transmissions are long distance. You can send documents to any G3 fax machine by using the Internet via a LAN from your machine to another Relay Station.
Message Delivery Notice (MDN) Several Email applications such as Eudora and Outlook Express support and are able to respond to the delivery confirmation notification sent from the Internet Fax. As well as sending a request for notification to the Internet Fax by Email applications that support MDN (Message Delivery Notice) function. If the receiving station is an Internet Fax station A Message Delivery Notice (MDN) with communication capability notice is returned to the sender.
Direct Internet Fax Transmission (Using Direct SMTP) Email is normally distributed by an SMTP mail server using Simple Mail Transfer Protocol (SMTP). Chapter 5 In common cases only Email and web service from the Internet are permitted into the corporate intranet, and corporate network administrators are extremely unwilling to open the firewall for other incoming services, since each opened path represents additional potential security threats.
Memo Chapter 5 Internet Fax 95
Tips for Internet Fax Chapter 5 Your machine uses the same communication protocols as Email: the Simple Mail Transfer Protocol (SMTP). The differences from a standard G3 fax communication using the Public Switched Telephone Network (PSTN) are as follows. Differences between Internet Fax and Fax Stations on the Telephone Line Fax stations connected to the telephone line transmit data over a telephone line at their own expenses.
Dual Port Communication Transmission Resolution In view of PC transmission, the standard setting of the resolution is set to “Fine” mode. If required, this setting can be changed to “Std”. (see page 26) Receive Internet Email Messages • Received Email font and character size are fixed and cannot be changed. • Text Email will be printed at about 72 lines per page. It is recommended that you use A4 size recording paper.
Preparing to Use Internet Fax Chapter 5 To use the Internet Fax feature, your machine needs to be set up properly on your network. Please contact your network administrator for actual network setup. Copy the Important Information form found at the end of Operating Instructions (For Setting Up) and ask your network administrator to complete the information on the form.
Sending Email (This machine -> Other Internet Fax machine or PC) This machine -> Other Internet Fax machine or PC Chapter 5 SMTP Server LAN POP Server Internet Fax or 99
Sending an Email Procedure Chapter 5 The basic operation to send an Email is as follows: z Email Addresses and Fax Stations can be mixed while entering the destinations. Email would be transmitted to an Email address destination, while normal fax documents would be transmitted to a fax destination. 1 Place original(s). Select “Basic Menu” if additional settings are required. Internet Fax Used memory Face Up. Up to 70 sheets (80 g/m2). z Setting Original Quality.
3. Select “Email”. 5. Press the Start key. Chapter 5 Enter an Email address by selecting “Keyboard” or select a preprogrammed Email address. z If the transmission fails, an error response is delivered from the mail server and printed on this machine. The error mail including an error message and an image of the first page of the transmitted document is received. Refer to When Email Transmission Fails. (See page 120) z For instructions on how to cancel transmission, refer to Cancelling a Communication.
Entering an Email Address Chapter 5 Internet Fax 102 Email addresses can be entered by any of the following methods: Using the onscreen keyboard Using the address book Enter the Email address directly. (See page 103) Use the pre-programmed Address Book. Use a Key Name. (See page 104) Search through “Favourites”. (See page 104) Use Group Dialling. (See page 105) Searching for destinations Search the Address Book or the Global directory service (LDAP). Search through the Address Book (Local Search).
Using the Onscreen Keyboard To enter an Email address directly from the onscreen keyboard, follow the steps below: Select “Email”. There are three ways to enter Email addresses: 3 Enter an Email address Directly Enter an entire Email address from the onscreen keyboard. On the Email screen, select “Keyboard”. Use the Default Domain Internet Fax z To set multiple Email addresses, follow the steps below: 1 Enter the first Email address, and then select “OK”.
Using the Address Book Chapter 5 Use a Key Name Search through “Favourites” If an Email address is pre-programmed in the address book, it can be selected by using a Key Name. If an Email address is pre-programmed in the “Favourites”, it can be selected from “Favourites”. z To use the address book, it is necessary to have Email addresses added to the address book in Function Parameters. Refer to Adding an Email Address to Address Book.
Use Group Dialling z To use a Group button, group dialling needs to be programmed in Function Parameters. Refer to Setting for Group Dialling. (See page 173) 1 2 Follow the step 1 and 2 on page 100. Chapter 5 For transmission to multiple destinations with group dialling, follow the steps below. Select “Program/Group”. Internet Fax 3 Select the Group you want to send. z Select the same destination again to cancel the choice. 4 Press the Start key.
Searching for Destinations Chapter 5 Search through the Address Book (Local Search) The Email address of a remote station programmed in the address book can be searched by its entry name. 1 2 Internet Fax 3 Follow the step 1 and 2 on page 100. 4 Select “Search”. Enter the character string you want to search for. Select the destination to which you want to send, and then select “OK”. z Select results. 5 or to scroll through the search Press the Start key.
Search through the LDAP server (LDAP Search) To find out whether the LDAP search feature works in your particular environment, contact your network administrator. z An LDAP Server must be configured before the LDAP search facility can be used. For more details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. z This feature is available in certain countries only. Follow the step 1 and 2 on page 100.
6 Choose a destination, and then select “OK”. Chapter 5 Internet Fax z Only one Email address can be selected at a time. z You can switch between the Email addresses and fax numbers list by selecting “Email” or “Fax Number” button on the screen. z Select results. or to scroll through the search z Select “Detail” to open the screen shown below offering you more detailed information. Select “Close” to exit to the information screen. z To cancel the search, select “Cancel”. 7 Press the Start key.
Memo Chapter 5 Internet Fax 109
Using Cc, Bcc and From Chapter 5 When creating an Email, you have the option of setting Cc and Bcc as its destinations and entering a subject. If the use of From has been enabled in Function Parameters, the machine can transmit an Email with Email addresses entered in From other than its own Email address. z Cc ................ Carbon Copy z Bcc ..............
Setting Cc and Bcc To set Cc and Bcc as Email destinations, follow the steps below: Select an Email address, and then select “Close”. Internet Fax 2 On the Email screen, select “Cc” or “Bcc”. (see pages 101 and page 110) Chapter 5 1 z For instructions on how to set an Email address, refer to Entering an Email Address. (See page 102) 3 Press the Start key. The original(s) are stored into memory with a file number. Then starts Email transmission.
Setting From field Chapter 5 The From field is preset in the Machine, you can change the From field by selecting “From” on the Email screen. To set From field, follow the steps below: If “145 Sender Selection” is set to “Valid”, you can preset up to 25 sender names. You can select from the sender list when sending an Email. However, if you select “From” on the Email screen, the sender list will not be displayed.
Confirming the Destination Every time you send Email, you can enter its subject manually. To enter a subject, follow the steps below: You can confirm the entered destinations. 1 z Default Subject is preset if “21 Default Subject” has been set in Function Parameters (Fax/Email Settings> User Parameter). For programming instructions, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. On the Email screen, select “Subject”.
Setting a File Type and a Filename Chapter 5 Documents can be scanned into a PDF or TIFF format, and renamed as well. z Internet Fax does not support the PDF format. If a document is transmitted to Internet Fax with the PDF format, the Internet Fax at the receiving station would be unable to print the images, resulting an error. z The file is automatically named “Image.tif” unless you rename the attached file. 1 Place Original(s).
7 Enter a filename, and then select “OK”. Chapter 5 z For using the onscreen keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) on the provided CD-ROM. z If you make a mistake, select “Back Space” to delete one character at a time, or move the cursor to the beginning of the field, and then select Clear key to delete the entire entry. 8 Internet Fax z The filename can be up to 20 characters long. Set an Email address. z Refer to Entering an Email Address.
Emailing an A3-Sized Document Chapter 5 Receiving stations may not receive large documents depending on their recording capability (paper size). If you want to transmit a document larger than A4, such as a ledger size, by using the Internet Fax feature, check the paper size capability of the receiving station before transmission. If the receiving station is capable of receiving an A3-sized document, you can send the document without reducing its size.
5 Select “A3 Email XMT”. 8 Press the Start key. Select “On”, and then select “OK”. Internet Fax 6 Chapter 5 The original(s) are stored into memory with a file number. Then starts Email transmission. The document is transmitted at the same ratio scale as it has been scanned. The document is transmitted, reduced in size according to the setting of “141 LAN XMT Reduce” preprogrammed in Function Parameters (Fax/Email Settings> Fax Parameters). 7 Set an Email address.
Setting Message Delivery Notice (MDN) Chapter 5 To enable Message Delivery Notice feature, follow the procedures below. z Standard setting of “173 Delivery Notice” can be changed in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions on how to change the standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 1 Place Original(s). Internet Fax 5 Select “Delivery Notice”. 6 Select “On”, and then select “OK”.
7 Set an Email address. Chapter 5 8 Press the Start key. The original(s) are stored into memory with a file number. Then starts Email transmission. When the Email is opened at the receiving station, a delivery notice will be Emailed automatically. Internet Fax z Refer to Entering an Email Address.
When Email Transmission Fails Chapter 5 Internet Fax 120 If the Email fails to reach its destination, an error mail is returned from the mail server and is printed on the machine. The error mail includes an error message and the image of the first page of the transmitted document to alert the sender the conditions of the failure.
Using a Completion Notice z Before using this function, install the Panasonic Document Management System and PCL Printer Driver, and then set up the each software. z Refer to Completion Notice of the Operating Instructions (For Setting Up) of provided CD-ROM. 1 Place Original(s). Select “Email” 7 Set an Email address. z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 4 Press the Fax key. Select “Basic Menu”.
Receiving an Email Chapter 5 If the machine connects to a network as a POP Client, it can receive Email either automatically or manually. The Email reception method from a POP Server varies depending on the POP settings programmed in Function Parameters. Configure to Receive Email Program the following parameters in Function Parameters (Fax/Email Settings> Fax Parameters) to receive Email: Item Name Internet Fax “146 POP Timer” Setting Set the time interval for checking the Email on POP Server.
Receiving Email Manually z With POP acquisition interval set between 1 and 60 minutes, queries are transmitted to the POP Server periodically to check for new mail and the number of the incoming Email messages on the server appears on the display. Press the Fax key. Check for incoming mail(s). 3 Select “Basic Menu”. 4 Select “Get Email”. Internet Fax 1 2 Chapter 5 With “147 Auto POP Receive” set to “Invalid” in Function Parameters (Fax/Email Settings> Fax Parameters), Email is received manually.
Receiving Email with the Program Key Chapter 5 This function allows others to share your machine to retrieve their Emails from the POP Server by preprogramming their POP User Names and POP Passwords into the Program Keys. They will be able to retrieve their Emails by simply pressing the associated Program Key.
Memo Chapter 5 Internet Fax 125
Receiving an Email on a Computer Chapter 5 This section explains how to receive Emails transmitted from the machine to a computer, and also explains the Emails forwarded from the machine to a computer. Receiving Email on Your Computer A sample screen shot of a mailer that has received Email from Internet Fax is shown below. Internet Fax For your reference, the above example is from Outlook Express Inbox running under Microsoft® Windows.
Opening Email When you open an Email received from Internet Fax, the screen as shown below is displayed. Chapter 5 Internet Fax z For your reference, the above example is from Windows Messaging running under Microsoft® Windows. z To run the Viewer, please refer to your application’s User Manual. The attached file is composed of TIFF-F (Tagged Image File Format with Modified Hoffman coded image).
Inbound Routing Chapter 5 What is Inbound Routing? Using the Inbound Routing feature, your machine can route documents received from a G3 fax machine to Email address(s) or to Internet Fax machine(s) connected to a LAN as an Email, as well as to other G3 Fax machine(s) over the telephone line. z For more details on the types of fax that work with routing, contact your local authorized Panasonic dealer.
Routing Setup Flow Configure your machine for Internet Fax (see page 98) Set required parameters to “Valid” in Function Parameters To use sub-addressing...........................Set “152 Sub-Addr Routing” to “Valid” in Function z Refer to Settings for Inbound Routing. (See page 130) Internet Fax Parameters ( Fax/Email Settings > Fax Parameters) To use a numeric ID ...............................
Settings for Inbound Routing Chapter 5 To use the inbound routing feature, program the following parameters to meet the type of routing in Function Parameters (Fax/Email Settings): Routing type Explanation Function Parameters Internet Fax Routing by subaddressing Set this parameter to perform an ITU-T sub-address query within its auto dialler and to route the received document(s) to corresponding stations Email address(s) or telephone number(s).
Programming the Address Book for Inbound Routing To use the inbound routing feature, program the transferring destination in the address book. 1 2 5 Select “Fax/Email Settings”. Enter an Email address, and then select “OK”. z For instructions on how to enter Email addresses, refer to Entering an Email Address. (See page 102) Select “00 Address Book”. Internet Fax 3 Press the Function key. Chapter 5 z For instructions on how to register the address book, refer to Address Book.
7 Enter a key name, and then select “OK”. 9 Select whether to add the Email address to “Favourites”. Chapter 5 Internet Fax Select to display the station in “Favourites”. z Key names are used to select the destinations on the touch-panel display. z For using the onscreen keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 8 Select not to display the station in “Favourites”. Select “IFax”, and then select “OK”.
11 To enable routing by a numeric ID, z Press Reset key to return the machine to the initial screen of the current active mode. Internet Fax z This screen appears when “153 TSI Routing” has been set to “Valid” in Function Parameters (Fax/Email Settings>Fax Parameters). Chapter 5 enter a numeric ID, and then select “OK”. The Email address is added to the address book.
Using the Relay Feature Chapter 5 What is the Relay Feature? From your PC or your machine, you can send documents to the End Receiving Station(s) via an Internet Relay Station. After the Relay Station completes its transmission to the End Receiving Station, your PC or your machine receives a COMM. Journal from the Relay Station. This COMM. Journal confirms whether the Internet or Intranet Relayed Transmission was successful.
Relay Station • Each time a relay station completes a transmission, it transmits a Relayed Transmission Report (Communication Journal) to the initial sending station to designate its relayed transmission request and Emails a Fax Relay Log to the administrator’s computer at the relay station. End Receiving Station(s) • On receiving a fax document from the relay station, the mail header and mail text will be printed on the first page, and the file attachment (TIFF) on the next and subsequent pages.
Setting up a Relayed Transmission Network This section explains how to set up a relayed broadcasting network.
Example of a Relayed Transmission Network An example of a relayed transmission network using relay stations at two locations is shown below. • Documents are transmitted from the relay stations (London/Singapore) to end receiving stations (Stockholm, Rome, Tokyo, Hong Kong, Sydney and others) via the telephone lines. • This network uses relay stations at two locations.
Sample Entries in Address Book Chapter 5 Table 1: Initial Sending Station (New York) zTelephone number zEmail address (SMTP) zHost name zRelay XMT password : : : : Station Name 212 111 1234 ifax@newyork.panasonic.com newyork usa-rly Email Address/Telephone Number Relay Station Address Internet Fax London ifax@london.panasonic.co.uk Stockholm 46 8 111 1234 Singapore ifax@singapore.panasonic.co.sg Tokyo 81 33 111 1234 London Relay uk-rly@london.panasonic.co.
Table 3: Relay Station (Singapore) Station Name : : : : 65 111 1234 ifax@singapore.panasonic.co.sg singapore sg-rly Email Address/Telephone Number Relay Station Address ifax@london.panasonic.co.uk Stockholm 46 8 111 1234 New York ifax@newyork.panasonic.com Tokyo 81 33 111 1234 London Relay uk-rly@london.panasonic.co.uk Rome 39 6 111 1234 “London Relay” Hong Kong 852 23123456 “Singapore Relay” Sydney 61 2 111 1234 “Singapore Relay” Singapore Relay sg-rly@singapore.panasonic.co.
Function Parameters for Relay Stations Program the following parameters to use this machine as a relay station in Function Parameters: Chapter 5 Item 1 Required function Parameters Fax Parameters “142 Relay XMT” Explanation Selecting whether the machine will accept and perform G3 relayed transmission. • Invalid Machine will not accept a Relay XMT request. • Valid Machine will accept a Relay XMT request. 2 Internet Fax Fax Parameters “143 Relay XMT Report” Selecting how the COMM.
Item User Parameters “37 Manager’s Email Addr” Explanation Register the Department Manager’s Email Address for supervising and cost control purposes. Once registered, the machine will send an Email notification to the Email address for each Relayed XMT Request received from a remote station. The following information is sent. (From: The Email address of the originating station.) (To : The telephone number of the destination G3 fax machine.
Adding End Receiving Stations for Relayed Transmission You can add end receiving stations to the Address Book by the following procedure. Chapter 5 z If broadcasting to multiple end receiving stations is required, use group dialling. (see page 173) z “140 LAN RLY XMT Request” must have been set to “Valid” in Function Parameters (Fax/Emai Settings> Fax Parameters) to have a LAN relayed transmission request pre-programmed in the address book.
6 Enter a station name, and then select “OK”. 8 Select whether to add a station to “Favourites”. Chapter 5 z Enter a station name up to 15 characters. z For using the onscreen keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 7 Select not to show the station in “Favourites”. Enter a key name, and then select “OK”. 9 Internet Fax Select to show the station in “Favourites”.
Relayed Transmission from Internet Fax Chapter 5 Documents can be transmitted to fax stations on the telephone line via Internet Fax relay stations. Internet Fax LAN Internet Fax G3 Fax PSTN Internet Fax Mail Server G3 Fax Internet PC 1 Place Original(s). G3 Fax 5 z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 Select a Relay Station or enter the Email address of the relay station. Press the Fax key.
7 Select an end receiving station to which the relay station relays. Chapter 5 z Multiple stations can be programmed as end receiving stations. 8 Press the Start key. Email is sent to the relay station, together with the fax number of the end receiving station. Internet Fax z For instructions on how to enter destinations, refer to Entering a Destination. (See page 16) When the relay station completes the transmission to the end receiving station, a communication journal is delivered.
Relayed Transmission from PC Chapter 5 Using your Email application, you can send any document(s) from your PC as a TIFF-F attachment to one or multiple G3 Fax machines automatically through the Internet Relay Station. End Receiving Station LAN Internet Relay Station G3 Fax Internet Fax PC PSTN Mail Server PC Internet G3 Fax G3 Fax The Internet Relay Station (your machine) must be properly setup with all the required parameters.
Requesting a Relayed Transmission from a Computer Sample entry: sg-rly#8133111234@singapore.panasonic.co.sg Entry example Explanation Enter the Relay XMT Password. (It must match the Relay XMT Password preprogrammed in the relay station.) #8133111234 Enter the telephone number of the fax station. In addition to the telephone number, address book information may be entered between # to @.
Convenient Application Software Chapter 5 TIFF Converter The TIFF converter is an application that converts files created in another application to the Internet Fax-ready TIFF format. Files created by MS-Word or Excel (*.doc and *.xls) cannot be transmitted to Internet Fax as Email attachments in their original form. To transmit files created by MS-Word or Excel from a computer to Internet Fax, it is necessary to have them converted to the Internet Fax-ready TIFF format using the TIFF converter.
Memo Chapter 5 Internet Fax 149
Result of Relayed Transmission Chapter 5 When the relayed transmission feature is used, two reports as described below are transmitted from the relay station to the initial sending station and administrator’s computer confirming the results of a relayed transmission. Relayed Transmission Report (communication journal) When a relay station completes a relayed transmission, it transmits a Relayed Transmission Report (Communication Journal) to the initial sending station to report the relay result.
No. Item Explanation Number of pages transmitted or received The 3-digit number is the number of pages successfully transmitted or received. When the documents are stored into the memory, two 3-digit numbers will appear. The first 3-digit number represents the number of pages successfully transmitted. The second 3-digit number represents the total number of pages that were attempted to be transmitted. (10) Duration of Communication Duration of Communication.
Useful Terms to Remember Chapter 5 DHCP (Dynamic Host Configuration Protocol) DHCP is a protocol for dynamically assigning IP addresses to Internet Fax and client PCs. With DHCP, an Internet Fax can automatically acquire a unique IP address each time it connects to a network making IP address management an easier task for network administrators. When an Internet Fax logs on to the network, the DHCP server selects an IP address from a master list and assigns it to the system.
Memo Chapter 5 Internet Fax 153
Chapter 6 Editing a Communication Reservation File Handling Communication Reservation Files Chapter 6 Your machine has a document image memory which enables you to reserve memory transmission, memory deferred transmission, memory polling and so on. After reserving the communications in memory, you may need to change the settings of the communication(s) while it is still in memory. This section describes how to use the file editing features.
Reading the Reservation Report Items covered in the reservation report are as follows: (2) (3) File Comm. Type No. (4) (5) (6) Created Time Start Time Page(s) Destination(S) dd-MMM 19:54 10:50 001 [pana03 ] 021 Memory XMT dd-MMM 19:56 10:30 001 [pana01 ] [pana03 *038 Memory XMT dd-MMM 09:02 005 [pana_Lanrelay ] - PANASONIC ***** DP-xxxx ********************** - HEAD OFFICE No.
Editing Communication Reservations To change the start time and/or stations in a communication file, follow the steps below. Chapter 6 Handling Communication Reservation Files 156 z Communication reservations for the documents being transmitted cannot be modified. 1 2 3 Press the Fax key. 5 Select “More Menus”. Select “Edit File Mode”. z If you do not need to program a timer controlled communication, go to step 7. 6 4 Select a communication reservation file to be edited, and then select “OK”.
7 Edit the destination. Chapter 6 z To add destination(s), select “Add”, and then go to step 8. 8 9 Select the destination, and then select “OK”. When the change completes, select “OK”. 10 To return to standby, press the Reset key. Handling Communication Reservation Files z To delete a destination(s), select “Delete”, and then go to step 9.
Deleting a Communication Reservation File To delete the file in memory, follow the steps below. Chapter 6 Handling Communication Reservation Files 158 z Your machine cannot delete the file while it is being sent. 1 2 3 Press the Fax key. 5 Select “More Menus”. Select “Edit File Mode”. Select a communication reservation file to be deleted, and then select “OK”. z Select “All Files” to select all communication reservation files. z To cancel the deletion, select “Cancel”. 6 4 Select “Yes”.
Printing a Communication Reservation File Communication reservation files stored in memory can be printed. 1 2 Press the Fax key. 5 Select “More Menus”. Select “Edit File Mode”. 4 Select “Print File”. 6 Select a communication reservation file to be printed, and then select “OK”. z To cancel the print, select “Cancel”. 7 8 Selected communication reservation file is printed. To return to standby, press Reset key.
Adding Documents to a Communication Reservation File Documents can be added to a communication reservation file stored in memory. Chapter 6 Handling Communication Reservation Files 160 z Your machine can not add document into the file while it is being sent, waiting to redial, or trying to send the incomplete file. 1 Place the additional Document. 6 z Refer to Placing Originals (Facsimile/Internet Fax) in the Operating Instructions (For Basic Operations) of provided booklet. 2 3 Press the Fax key.
Resending an Incomplete Document This section explains how to resend incomplete files stored in memory. z The standard setting of “31 Incomplete File Save” is set to “Invalid”. For instructions on how to modify the standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 1 2 Press the Fax key. 5 Select “More Menus”. Select or to find the incomplete file that you want to resend. z To send all incomplete files, select “Select All”.
Chapter 7 Address Book Chapter 7 Program Destinations/Program Keys 162 Program Destinations/Program Keys What is Address Book? With the fax numbers or Email addresses of remote stations programmed in the address book, the stations can be selected with a single operation on their button appearing on the touch-panel display.
Adding a Fax Number into the Address Book To add a fax number to the address book, follow the steps below: z For instructions on how to delete the station from the address book, refer to Deleting a Destination from Address Book. (See page 168) 3 Press the Function key. 5 Select “Fax/Email Settings”. Select “00 Address Book”. Enter a fax number, and then select “OK”. z Select “Clear” to delete the fax number one digit at a time.
7 Enter key name, and then select “OK”. 9 Set the Email address of a relay station, and then select “OK”. Chapter 7 Program Destinations/Program Keys z Key names are used to select destinations on the touch-panel display. z For using the onscreen keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 8 z This screen appears when “140 LAN RLY XMT Request” has been set to “Valid” in Function Parameters (Fax/Email Settings> Fax Parameters).
Adding an Email Address to Address Book To add an Email address to the address book, follow the steps below: z For instructions on how to delete the station from the address book, refer to Deleting a Destination from Address Book. (See page 168) 3 Press the Function key. 5 Select “Fax/Email Settings”. Select “00 Address Book”. Enter an Email address and select “OK”. z For instructions on how to enter Email addresses, refer to Entering an Email Address.
7 Enter a key name, and then select “OK”. Select to display the station in “Favourites”. Chapter 7 Select not to display the station in “Favourites”. 10 To enable sub-addressed routing, Program Destinations/Program Keys enter a sub-address, and then select “OK”. z Key names are used to select destinations on the touch-panel display. z For using the onscreen keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
Editing Address Book To edit the station in the address book, follow the steps below: 5 Select “Fax/Email Settings”. Select “00 Address Book”. Select the station you want to edit, and then select “OK”. z Select the same button again to cancel the choice. 6 Edit the station. z For more information, refer to Adding a Fax Number into the Address Book. (See page 163) and Adding an Email Address to Address Book.
Deleting a Destination from Address Book To delete a remote station from the address book, follow the steps below: Chapter 7 1 2 Program Destinations/Program Keys 3 Press the Function key. 5 Select “Fax/Email Settings”. Select the station you want to delete from the address book, and then select “OK”. Select “00 Address Book”. z Select the same button again to cancel the choice. 6 4 Select “Yes”. Select “04 Delete Station”. Select to delete the selected station. Select to cancel the deletion.
Printing the Address Book List To print the address book list, follow the steps below: z For more details about items in the address book list, refer to Reading Address Book List. (See page 191) 1 2 Press the Function key. 5 Select “Start”, and then select “OK”. Chapter 7 z The address book list can also be printed by selecting “Print Out” in “More Menus”. (See page 190) Select “Fax/Email Settings”. 3 Select “00 Address Book”. 4 Select “00 Print Address Book List”.
Program Keys Chapter 7 What is Program Keys? There are three ways to use program key as follows: Using for Program Dialling You can set communication sequences or destinations which you often use. Using for Group Dialling Program Destinations/Program Keys Multiple destinations can be selected from the address book and pre-programmed on a single program key for group dialling.
Setting for Program Dialling To program a communication feature on program key, follow the steps below: z For instructions on how to delete pre-programmed station, refer to Deleting a Destination from Address Book. (See page 168) z For instruction how to print the program list, refer to Printing the Program List. (See page 179). 3 Press the Function key. 5 Select “Fax/Email Settings”. Enter a program dial name, and then select “OK”. z Enter a name up to 15 characters. Select “01 Program Keys”.
7 z Deferred Communication Transmit (see page 48) Polling (see page 50) Chapter 7 Program Destinations/Program Keys 172 Program each desired feature. z Polling (see page 52) z Advanced Communication MailBox (see page 56) Sub Address Transmit (see page 64) 8 Press the Start key. The program dial is programmed. z Press Reset key to return the machine to the initial screen of the current active mode.
Setting for Group Dialling To program multiple destinations on program key, follow the steps below: z For instructions on how to delete pre-programmed station, refer to Deleting a Destination from Address Book. (See page 168) z For instruction how to print the program list, refer to Printing the Program List. (See page 179) z To program multiple destinations, each destination must be programmed in advance. 3 Press the Function key. 5 Select “Fax/Email Settings”. z Enter a name up to 15 characters.
7 Select the destinations to be programmed, and then select “OK”. Chapter 7 Program Destinations/Program Keys 174 The group dialling is programmed. z Press Reset key to return the machine to the initial screen of the current active mode.
Editing a Group Dialling To edit a group dialling, follow the steps below: 5 Select “Fax/Email Settings”. Select “01 Program Keys”. z Select the same button again to cancel the choice. 6 4 Select the Group Dial button you want to edit, and then select “OK”. To rename a group dial name, enter a new name, and then select “OK”. Select “03 Modify Group Dial”. 7 To rename a group dial key name, enter a new name, and then select “OK”.
8 Select the destination to be programmed, and then select “OK”. Chapter 7 Program Destinations/Program Keys 176 z Press Reset key to return the machine to the initial screen of the current active mode.
Memo Chapter 7 Program Destinations/Program Keys 177
Deleting the Program Key setting To delete a program dialling or group dialling destination, follow the steps below: Chapter 7 1 2 Program Destinations/Program Keys 3 Press the Function key. 5 Select “Fax/Email Settings”. z Select the same button again to cancel the choice. Select “01 Program Keys”. 6 4 Select a program key, and then select “OK”. Select “Yes”. Select “04 Delete Program/GRP”. Select to delete the program key Select to cancel the deletion.
Printing the Program List To print the program list, follow the steps below: z For more details about the items in the program list, refer to Reading Program List. (See page 193) 1 2 Press the Function key. 5 Select “Start”, and then select “OK”. Chapter 7 z The program list can also be printed by selecting “Print Out” in “More Menus”. (See page 192) Select “Fax/Email Settings”. 3 Select “01 Program Keys”. 4 Select “00 Print Program List”.
Programming Email Manual Reception on Program Keys Chapter 7 When this machine is connected to a POP Server, POP Account name and password other than the machine’s one can be programmed for a program key to receive Emails. To enter an Email address and a password, follow the steps below: z If you leave a password blank in Step 8, a password prompt window will appear upon POP reception. In order to strengthen the security, you are advised to leave a password blank.
8 Enter the password, and then select “OK”. Chapter 7 Select “Invalid” or “Valid”, and then select “OK”. Invalid Select to leave Email on the POP Server after it has been received. Valid Select to delete Email from the POP Server after it has been received. The POP reception feature is programmed. z Press Reset key to return the machine to the initial screen of the current active mode.
Chapter 8 Transaction Journal Reading Reports/Lists Chapter 8 The “Journal” is a record of the last 200 transactions (a transaction is recorded each time you send or receive a document). It is printed out automatically after every 200 transactions or you can print or view it manually by using the following procedure. • Regardless of the “13 Auto Print JRNL” setting in Function Parameters, a transaction journal can be printed by selecting “Journal” from “More Menus”.
Viewing Communication Results on Touch-Panel Display To view the communication results on the touch-panel display, follow the steps below: 5 Select “More Menus”. Communication results will be displayed. XMT Only (View) Select to view only the transmission result. All (View) Select to view both the transmission and reception results. Select “Print Out”. 6 4 Select “XMT Only (View)” or “All (View)”. When the verification completes, select “OK”. Reading Reports/Lists 3 Press the Fax key.
Reading Transaction Journal Items in the transaction journal are listed below. Chapter 8 Reading Reports/Lists 184 (1) (2) **************** -Journal- *************************** Date DD-MMM-YYYY **** Time 15:00 ***** P.01 (6) (7) (8) (9) (10) (11) No. (3) (4) Comm.
No. Item Explanation Number of pages transmitted or received. The 3-digit number is the number of pages successfully transmitted or received. When the documents are stored into the memory, two 3-digit numbers will appear. The first 3-digit number represents the number of pages successfully transmitted. The second 3-digit number represents the total number of pages that were attempted to be transmitted. Asterisk “*” indicates that the quality of some received copies was poor.
Communication Journal Chapter 8 Reading Reports/Lists 186 This is a report that is printed at the end of each transaction to keep a record of the communication result. • A communication journal is printed when the “12 Comm. Journal (HOME)” has been set to “Always” or “Inc Only” in Function Parameters (Fax/Email Settings> Fax Parameters).. If set to “Always” A communication journal will be printed when a transaction completes or fails.
Items that are covered in the communication journal are listed below. (1) (2) Mode= Memory Transmission (3) Start = DD-MMM 14:50 End = DD-MMM 15:00 File No.= 050 (4) (5) (6) Stn No. 001 002 003 004 Comm. Key Name (7) OK [SERVICE OK [SALES DEPT 407 [ACCOUNTING Busy ] ] ] (8) (9) (10) Station Name/Email Address/Telephone No.
No. Chapter 8 Reading Reports/Lists 188 Item Explanation (6) Communication result (7) Key name or (8) Recorded name in the of provided booklet, direct dialling number, or Email address Recorded name in the of provided booklet, direct dialling number, or Email address. (9) Number of pages transmitted or received The 3-digit number is the number of pages successfully transmitted or received. When the documents are stored into the memory, two 3-digit numbers will appear.
Memo Chapter 8 Reading Reports/Lists 189
Address Book List Chapter 8 This section explains how to print and read the address book list. Reading Reports/Lists 1 2 190 Printing Address Book List To print an address book list, follow the steps below: The address book list can also be printed by programming “Fax/Email Settings> Fax Parameters” in Function Parameters. Press the Fax key. 4 Select “Address Book List”. Select “More Menus” The address book list will be printed. 3 Select “Print Out”.
Reading Address Book List Items in the address book list are listed below. (1) (2) (3) Key Name (4) Station Name Email Address / Telephone No. Routing Sub-Addr (6) Routing Tsi (7) Relay Addr(8) [B] [Bob Jones ] [J] [John Smith ] [John Smith ] ] [Panafax2 ] No. Of Stations = 05 Jonesb@abcdefg.com 201 555 1212 201 555 3156 +1 201 123 4567 [RELAY1] 201 555 3156 212 555 1234 [RELAY2] Panafax1@Panasonic.com.co.jp +81 03 5251 1234 Panafax2@Panasonic.com.co.
Program List Chapter 8 This section explains how to print and read the program list. Reading Reports/Lists 1 2 192 Printing Program List To print the program list, follow the steps below: The program list can also be printed by programming “Fax/Email Settings> Fax Parameters” in the Function Parameters. Press the Fax key. 4 Select “Program List”. Select “More Menus”. The program list will be printed. 3 Select “Print Out”.
Reading Program List Items in the program list are listed below. (1) (2) Key Name Program Name Type Timer Destination(S) TEST ACCOUNT ACC PROG.B Group POP POP Group ----------------- [PANAFAX Delete Email Delete Email [PANAFAX [TEST [ACCOUNT [ACC [PROG.B ] ] ] ] (3) (4) ][SALE DEPT : Invalid : Valid ][PANASONIC ] (5) ] Chapter 8 *************** -Program List- ****************** Date DD-MMM-YYYY ***** Time 15:00 ********** -PANASONIC No.
Fax Parameter List Chapter 8 Reading Reports/Lists 194 This section explains how to print and read the fax parameter list. Printing Fax Parameter List To print the fax parameter list, follow the steps below: 1 2 Press the Fax key. 4 Select “Fax Parameter List”. Select “More Menus”. The fax parameter list will be printed. 3 Select “Print Out”. z Press Reset key to return the machine to the initial screen of the current active mode.
Reading Fax Parameter List Items in the fax parameter list are listed below. (1) (2) No. Description (3) (4) Selection (5) Current Setting Standard Setting 0 STD 0 Fine 000 Print FaxParameter list (6) 001 Density(HOME) * 002 Resolution(HOME) (-3 -2 -1 0 1 (STD Fine S-Fine) 2 3) ***** DP XXXX********************* -HEAD OFFICE No. - ***** - Items 201 555 12121 ********* Explanation (1) Parameter number Parameter number. (2) Description “(HOME)” means home position setting.
Individual XMT Journal Chapter 8 This section explains how to print and read the individual XMT journal. Printing Individual XMT Journal To print the individual XMT journal, follow the steps below: 1 2 Press the Fax key. Select “More Menus”. Reading Reports/Lists 3 Select “Print Out”. 4 Select “IND. XMT Journal”. The individual XMT journal will be printed. z Press Reset key to return the machine to the initial screen of the current active mode.
Reading Individual XMT Journal Items in the individual XMT journal are listed below. = DD-MMM-YYYY 00:02 (2) Journal No. = 035 (3) Comm. Result = OK (4) Page(S) = 001 (5) Duration = 09:00:01 (6) File No. = 053 (7) Mode = Memory Transmission (8) Destination = (9) Received ID = 0001 (10) Resolution 0123456789 = Std - PANASONIC - ******DP-XXXX ************************* - HEAD OFFICE - ***** - 201 555 1212 - *************** No.
Chapter 9 Tips for Solving Problems Chapter 9 If you encounter the problems, please check following items. Problem While sending Solving Problems While receiving 198 Solving Problems Symptom Action Refer to A document does not feed, or multiple pages are fed at the same time. • Check that the document does not have staples or clips attached to it and that it is not smeared or broken. • Check if the document is loaded properly. Does not stamp.
Problem Refer to No dial tone heard • Check the telephone line connection. • Check the telephone line. Checking the Telephone Line (see page 206) The machine won’t receive automatically • Check the telephone line connection. • Check the receive mode settings.
Information Codes Chapter 9 Solving Problems 200 In the event of communication failures, Information Codes appear in the transmission result or in the transaction journal. When an Information Code is displayed, take necessary action as recommended in the table below. For definitions of the Information Code not found here, refer to the User (U)/Jam (J)/Machine (E) Error Codes in the Operating Instructions (For Basic Operations) of provided booklet. Info.
407 No confirmation from the receiving station for the previous page sent. Wait a few minutes and send again. Remote side confirmation of previous page is illegible. Wait a few minutes and send again. 410 Communication aborted by the transmitting side. Check with the other party. 411 Polling password does not match. Check the polling password. 412 No data from the transmitting side. Check with the other party. 414 Polling password does not match. Check the polling password.
Info. code Chapter 9 Solving Problems 202 540/541/542/ 543/544 Problem Action Refer to Communication error occurred while transmitting. Reload the document and send again. Check with the other party. Telephone line disconnected. Check with the other party. 552/553/554/ 555 Communication error occurred while receiving. Check with the other party. 580 Sub-address transmission to a unit that has no Subaddress function. Check the remote station.
Info. code Problem Action Refer to Incomplete SMTP Protocol transmission. SMTP Server’s hard disk may be full. SMTP Server is defective. Contact the Network Administrator. 718 Page Memory Overflow occurred while receiving printing data. The paper size selected within your application to print is larger than the paper size loaded in the cassette(s). Check the document size and resolution. Ask originator to resend in a supported size and resolution.
Info. code Chapter 9 Solving Problems 204 800/814/816/ 825 Problem Action Refer to Unit was requested to relay a document or Confidential Communication but has no capability. Check with the other party. 815 Mailbox is full. Delete confidential documents. Deleting a Confidential Document (See page 62) 826 The received sub-address is not pre-programmed in the address book. Check entries in the address book. Check the entry of the sub-address of the remote station.
Power Failure The fax display remains off for the duration of a power failure, and you cannot send or receive documents. Problem FAX • When a power failure occurs • While a power failure persists When External Telephone is connected • When a power failure occurs • While a power failure persists Send a fax. • The fax transmission is aborted. Resend when power recovers. • You cannot send a fax. Receive a fax. • The fax reception is aborted. Ask the remote party to resend when power recovers.
Checking the Telephone Line Chapter 9 If you do not hear a dial tone when the “Monitor” is selected after pressing Fax key, or the incoming call does not ring on your machine (No automatic receive), please check telephone line by procedure in below. 1 Solving Problems 2 3 206 Unplug the Telephone Line Cable from the telephone jack that was supplied by the telephone company. Plug a different regular telephone into the same telephone jack. Check for dial tone through the handset.
Memo Chapter 9 Solving Problems 207
Chapter 10 Replacing the Verification Stamp Appendix Chapter 10 To replace the verification stamp, follow the steps below: z DZHT000027 (for USA and Canada) z DZHT000004 (for other countries) 1 Open the ADF Cover. 4 Open the Exit Guide while holding the green-labeled tab. Appendix 2 P9250577 Open the Inner Cover with holding the green-labeled tab. 5 6 3 208 Lift up the ADF Tray. Remove by pulling the Stamp Assembly upward. Remove the Stamp.
7 Reinstall the Stamp Assembly.
Glossary Chapter 10 Appendix 210 Term Meaning 10Base-T/ 100BaseTX An Ethernet standard for cable. The 10/100 refers to its 10/100 Mbps bandwidth, the base to single baseband, and the T to the Twisted pair. The cable uses two pairs of unshielded twisted wires. Address Book The Address Book is a convenient directory that stores contact Telephone Numbers and Email Addresses for easy retrieval at a future time.
Term Meaning Direct SMTP Allows iFax machines to communicate directly with each other within the Firewall (Intranet) without going through the Mail Server, thus alleviating the burden on the mail server. Disk Drive A peripheral storage device that holds, spins, reads and writes magnetic or optical disks. It may be a receptacle for disk cartridges, disk packs or floppy disks, or it may contain non-removable disk platters like most hard disks. Domain Name A unique name that identifies an Internet site.
Term Chapter 10 Appendix 212 Meaning G3 (Group 3) Refers to the standards and transmission capabilities of the current generation of facsimile machines. Group Dialling The ability to program many telephone numbers into a single station so that many locations can be dialled in sequence utilizing a single keystroke. Halftone A scanning technique to distinguish levels of grey from black and white.
Term Meaning JPEG Short for Joint Photographic Experts Group, and pronounced jay-peg. JPEG is a lossy compression technique for colour images. Although it can reduce files sizes to about 5% of their normal size, some detail is lost in the compression. JPEG is a graphical format that is widely used in WWW pages. Key Name An alternate to the station name that can be programmed for each Address Book dialling key. Keypad A group of numeric keys located on your Control Panel.
Term Chapter 10 Appendix 214 Meaning Network Any time you connect 2 or more computers together so that they can share resources, you have a computer network. Connect 2 or more networks together and you have an internet. Overlap Print Documents too long to be reduced are automatically printed on two pages with 10 mm overlap. Panasonic SuperSmoothing An electronic image enhancement (Panasonic Super Smoothing) that will create a particular pattern for the improvement of copy quality.
Term Meaning SD Card (Secure Digital Memory Card) A flash memory card that provides secure storage for your machine, which is also popular with handheld devices such as digital cameras, cell-phones, and PDAs. Selective Reception A function that can be set so that your unit will receive from only those machines programmed into your dialler. Server A computer, or a software package, that provides a specific kind of service to client software running on other computers.
Term Chapter 10 Appendix 216 Meaning TIFF Tagged Image File Format. One of the many different types of File Format used on PC’s. An image file format for attachments of graphic data for smooth transmission between different units. The coding method of this format supports the same coding as Modified Huffman (MH) and multiple-page image data. TIFF Image Viewer An application software to view the contents of TIFF-F File. Some TIFF Image Viewers may not display the data properly.
Memo Chapter 10 Appendix 217
The following trademarks and registered trademarks are used throughout this manual: Microsoft, Windows, Windows NT, Windows Server, Outlook & Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the USA and other countries. Adobe, Acrobat Reader & Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated. All other trademarks identified herein are the property of their respective owners.
