Operating Instructions - Function Parameters

8
Chapter 1 Before Starting
Basic Operations for Function Setup
The following procedure is an example of setting up the function(s). To set the desired function, refer to
the list of Function Parameters described later.
1 Press the Function key.
2 Select the desired setting.
3 Select the desired tab.
4 Select an item.
z If a single tab has six or more items, a block
number is displayed as “01/02”.
z Select or to scroll items up or down on
the screen.
z When setting the Key Operator Mode, enter
the identification code (4-digit), and then
select “OK”.
5 Change the settings by the following
operations.
 Selecting an item
Select a desired item, and then select “OK”.
Ex: When setting “01 Density(HOME)” in Fax/
Email Settings (see page 32).
 Entering the number
Select “Input” and enter the number, and then
select “OK”.
Ex: When setting “14 Power Save Mode
Timer” in General Settings (see page 11).