Operating Instructions Copier

58
Chapter 2 More Menus Features
Eliminate Dark Inner Binding Shadows
When copying original such as the centre of folding position may be shaded. This shade can be easily
eliminated.
z When “Zoom” is selected, the erasing width varies depending on the zoom ratio.
z When “Overlay” or “Form Overlay” is selected, this function cannot be executed for the overlay original.
1 Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2 Press the Copy key if the machine is
set to other function mode.
3 Select “More Menus”.
4 Select “Zoom / Effects”, and then
select “Book”.
5 Input the erasing width with “S” and
“T”, or the keypad, and then select
“OK”.
z The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
6 Enter the desired number of copies.
7 Press the Start key.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
(Only sort setting)
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
The shade is erased.