Operating Instructions - Function Parameters

42
Chapter 4 Fax/Email Settings
120-159 151 Email Header FMT Set the header information to print
when an Email is received.
(Normally used for
Troubleshooting. It shows the
path of the Email transmission
before arriving at your machine.)
•All
All the header contents are
printed.
• S/F/T
Only Subject, From, and To
are printed.
•Off
The header contents are not
printed.
All,
S/F/T,
Off
S/F/T
152 Sub-Addr Routing Set whether to automatically
route a received fax or Email
using sub-address.
Set “Valid” for routing.
Invalid, Valid Invalid
153 TSI Routing Set whether to route a received
fax to a telephone number or an
Email address pre-programmed
in the Address Book using the
originating fax’s Numeric ID.
Invalid, Valid Invalid
154 Route Header FMT Set the contents of the “From”
field when transferring Email to a
computer or internet fax on the
network by routing.
•Origi
Sender information is printed.
• Rly Stn
Relay station information is
printed.
Origi, Rly Stn Origi
155 Print Routed Doc Set whether to print a received
original to be routed.
• Inc Only
An original is printed only
when the routing operation
has failed.
•Always
An original is printed whether
the routing operation has
succeeded or failed.
Inc Only, Always Inc Only
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item Standard
Setting