Operating Instructions - Function Parameters

44
Chapter 4 Fax/Email Settings
160-184 164 IFax XMT Header Set whether to include the
header when sending an original
to an address in the same
Domain as specified in the
Default Domain parameter. (This
is useful when using the
machine to scan originals back
to your PC)
z When sending to a Domain
other than as specified in the
Default Domain parameter,
the header will be included
regardless of the selection.
Set “Included” to use Cc or Bcc.
Included, Not Inc. Included
170 SMTP Authentication If you transmit to the SMTP
Server, User Name and
Password are used for
authentication.
Select “Valid”
to set up the
User Name and
Password.
Invalid, Valid Invalid
171 POP before SMTP If you transmit to the SMTP
Server, POP User Name and
POP Password are used for
authentication.
(For details, consult with the
network manager.)
Invalid, Valid Invalid
172 Direct IFax XMT Set whether to be prompted
during Phone Book registration if
the station you are programming
is to receive Internet Fax directly
without going through a Mail
Server.
Invalid, Valid Invalid
173 Delivery Notice Set whether to request a
Message Disposition Notification
(MDN) for a delivery processing
confirmation indicating that the
transmitted original (Email/
Internet Fax) was read.
This notice can be set at every
transmission. When this notice is
returned from the recipient, the
communication result is recorded
in the communication journal.
Off, On On
174 APOP Authentication Set whether to encrypt the
protocol for the POP Password
security when connecting with
the POP Server.
(This setting depends on the
server. Consult with the network
manager.)
Invalid, Valid Invalid
Fax Parameters
z The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
No. Parameter Comments Selective Item Standard
Setting