Operating Instructions

Feature Code Description
Default
key
Set all features to
default
#159 Before you dispose of, transfer or return the product, activate
this feature to reset all programmable features and to delete all
data stored in memory.
• The following items will be deleted.
– Address book
– Caller information ( )
– Fax transmission data (journal report and fax received in
memory) ( )
• Disconnect the following cord/cable before activating this
feature.
– Telephone line cord (fax supported models only) ( )
– USB cable
– LAN cable (
)
–
Ringer pattern #161 To set the ringer pattern.
1
Beep sound #165 To set the beep sounds and keytones. If you wish to hear
confirmation/error beep sounds and keytones, activate this
feature.
Note
• Even if this feature is deactivated, the unit beeps in some
cases. For example:
– the front cover is opened.
1
Job end
notification
#174 To set the unit to alert you with a beeping sound after a print job
is finished.
Note
• This setting is valid for the following:
– PC printing
– Automatic report/list printing during fax transmission
( )
– Printing received faxes ( )
• When a printing error occurs, the unit will beep the error
beep instead of this beep, even if this feature is activated.
0
Home screen #179 To select the home screen design.
0
FAX ring count #210 To change the ring count in FAX ONLY mode.
Note
• If you are using the unit with an answering machine, set to
more than 3 (page 110).
• For EU models users:
If you change the location setting (feature #114), the ring
count will be reset to "2". If necessary, select the desired
ring count again.
2
Automatic Caller ID
list
#216 When this feature is activated, the unit will print the Caller ID list
automatically after every 30 new calls.
0
3.6 Programming features: Basic
Operating Instructions 51