Operating Instructions Blu-ray Disc™ Player Model No. DP-UB450 DP-UB159 DP-UB150 Firmware updates Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified. For details, refer to “Firmware updates” ( 15) or http://panasonic.jp/support/global/cs/ (This site is in English only.) Thank you for purchasing this product.
Precautions Batteries Mishandling of batteries can cause electrolyte leakage and may cause a fire. yy Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. yy When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. yy Do not mix old and new batteries or different types at the same time. yy Do not heat or expose to flame.
Restriction on use of unauthorized copied content This unit adopts the following technology for copyright protection. Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.
Table of contents Precautions . . . . . . . . . . . . . . . . . . 2 Getting Started Accessories . . . . . . . . . . . . . . . . . . 5 Unit and media care . . . . . . . . . . . 5 Playable media . . . . . . . . . . . . . . . 6 Control reference guide . . . . . . . . . 8 Connecting to a TV . . . . . . . . . . . 10 Connecting to an amplifier/ receiver . . . . . . . . . . . . . . . . . . . 11 Connecting to the network . . . . . . 13 Settings . . . . . . . . . . . . . . . . . . . . 14 Playback HOME menu . . . .
Getting Started Getting Started Accessories Unit and media care Check the supplied accessories before using this unit. 1 Remote control (N2QAYA000205) 2 Batteries for remote control 1 AC adaptor (TXH0009DA) Clean this unit with a soft, dry cloth Use the lens cleaner (not supplied) to clean the unit’s lens. yy Never use alcohol, paint thinner or benzine to clean this unit. yy Before using chemically treated cloth, carefully read the instructions that came with the cloth.
Getting Started Playable media Device Media markings Device types Contents format Ultra HD Blu-ray*1*2 Video BD-Video Video BD BD-RE BD-RE DL DVD BD-R BD-R DL Video, MKV, MP4, MPEG2, JPEG, MPO, AAC, AIFF, ALAC, DSD (DFF, DSF), FLAC, MP3, WAV, WMA DVD-Video CD BD DVD-R USB DVD DVD-R DL CD BD USB BD DVD DVD-RW — — CD-R CD-RW CD USB USB — Video, AVCHD, MKV, MP4, MPEG2, JPEG, MPO, AAC, AIFF, ALAC, DSD (DFF, DSF), FLAC, MP3, WAV, WMA Video, AVCHD +R/+RW/+R DL Music CD DVD CD Video
Getting Started Types of discs that cannot be played by this unit USB device yy Connect a USB device while the Home screen is displayed. yy This unit does not guarantee connection with all USB devices. yy This unit does not support USB device charging. yy FAT12, FAT16, FAT32, and NTFS file systems are supported. yy This unit supports USB 2.0 High Speed. yy This unit supports an HDD formatted in FAT32 and NTFS. If the HDD is not recognized, the power to the HDD may not be supplied.
Getting Started Control reference guide Remote control 10 1 1 2 3 4 5 6 7 8 9 2 3 11 4 12 10 11 12 13 5 6 Turn the unit on and off Select title numbers, etc.
Getting Started Front 5 1 1 2 3 2 Disc tray USB port ( = DC 5 V 500 mA) This port supports USB 2.0 High Speed. Remote control signal sensor Distance: Within approx. 7 m Angle: Approx. 20° up and down, 30° left and right 4 5 6 6 3 4 POWER LED The LED lights up when the unit is turned on, and flashes when error occurs. ( 32) Open or close the disc tray Standby/on switch (v/b) ( 14) Press to switch the unit from on to standby mode or vice versa.
Getting Started Connecting to a TV 4K images can be played back when this unit is connected to 4K compatible TV. yy Before making any connections, please disconnect all the units from AC power. (Connect the AC adaptor after making all connections.) yy Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. yy This unit consumes a small amount of AC power ( 33) even when turned off in standby mode.
Getting Started Connecting to an amplifier/receiver UB450 UB159 Enjoying video with a 4K-compatible TV and audio with an amplifier You can enjoy richer sound by using the HDMI AUDIO OUT terminal. (Audio is output in high resolution.) HDMI IN HDMI IN HDMI Cable HDMI Cable (18 Gbps) Amplifier/receiver Setting Set the following items in the setup menu ( 23): yy Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”.
Getting Started Connecting an amplifier to a 4K-compatible TV 3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV. yy This connection only supports up to 5.1ch. yy To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier must be ARC-compatible.
Getting Started Connecting to the network The following services can be used when this unit is connected to broadband. yy Firmware can be updated ( 15) yy You can enjoy BD-Live ( 18) yy UB450 You can access other devices (Home Network) ( 19) For details about connection method, refer to the instructions supplied with the connected equipment. LAN cable connection Broadband router, etc. LAN Cable Internet yy Use category 5e or above straight LAN cables (STP) when connecting to peripheral devices.
Getting Started Settings Easy Network Setting The following settings can be performed anytime in the Setup menu. ( 26, 27) Follow the on-screen instructions to establish your connection settings. Easy Settings After connecting your new player for the first time and pressing [v], the basic settings screen will appear. Preparation Turn on the TV and select the appropriate video input. 1 2 Press [v]. Setup screen appears. Follow the on-screen instructions to continue with the settings. (e.g.
Getting Started Firmware updates This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following message is displayed. Firmware Update * New Version: X.XX Current Version: X.XX Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.jp/support/global/cs/ Yes No OK RETURN Select “Yes” to start downloading the firmware.
Playback Playback HOME menu Playback Major functions of this unit can be operated from the HOME menu. Preparation Turn on the TV and select the appropriate video input. 1 1 2 2 Press [v] to turn on the unit. Press [OK] or [ , yyPress [OK] or [ , necessary. yy DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [ ] when you have finished playback to protect the unit’s motor, your TV screen and so on.
Playback Search/Slow motion Show the status messages Search While playing, press [ ] or [ ]. yy Ultra HD Blu-ray, MKV, MP4 and MPEG2: Audio is not heard. Slow motion ]. While paused, press [ yy MKV, MP4 and MPEG2: Not effective. The speed increases up to 5 steps. yy Music, MP3, etc.: The speed is fixed to a single step. yy Press [ ] to revert to normal playback speed. While playing, press [STATUS]. The status messages give you information about what is currently being played.
Playback Enjoying Ultra HD Blu-ray Enjoying 3D video and photos You can enjoy the playback of Ultra HD Blu-ray discs with this unit. Preparation yy For 4K/HDR viewing, connect to a device and terminals that support HDCP2.2*1, 4K (50p/60p) 4:4:4 and HDR signals that meet Ultra HD Bluray standards. ( 10) Due to copyright restrictions, it may not be possible to play back certain discs unless this unit is connected to the Internet. yy When connected to a device or terminal that does not support HDCP2.
Playback Home Network feature Slideshow Play a slideshow of photos and adjust various settings during the playback. 1 2 3 UB450 Before using the following features, be sure to configure the connected equipment on your Home Network. Insert the media. Select “View Photos”. Playing back contents on the Network Contents server Select an item and press the green button. The following items can be set. Start Slideshow Interval Transition Effect Repeat Play Start the slideshow.
Playback “HDMI CEC” Using the Digital Media Controller You can use a smartphone or tablet as the Digital Media Controller (DMC) to playback contents from Network Contents server*1 on the Renderer (this unit). Possible applications: Renderer Server Controller Renderer 1 2 3 4 Preparation *2 ① Set “HDMI CEC” to “On” ( 27). (The default setting is “On”.) *2 Server + Controller This unit supports “HDMI CEC” (Consumer Electronics Control) function.
Playback Option menu A variety of playback operations and settings can be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. 1 Press [OPTION]. e.g., Ultra HD Blu-ray 1 ENG Dolby TrueHD 3/... Subtitle Settings 1 Angle Off Repeat Play Status Show the status messages. Wallpaper Set the still picture to the wallpaper of HOME menu. ( 16) Status Primary Video Start Slideshow Start the slideshow.
Playback Picture Settings Dynamic Range Conversion Adjustment When this unit is connected to a TV that does not support HDR (High Dynamic Range) input, HDR video is output converting to a SDR (Standard Dynamic Range) video signal. If you set a smaller value, their contrast will be reproduced more faithfully, but the entire screen will appear darker. To increase the brightness, set a larger value. Picture Mode Select the picture quality mode during play.
Reference Reference Setup menu 24p Output Content recorded at 24p*3, such as BD-Video films, is output at 24p when played back. yy When this unit is connected to TV compatible with 4K/24p and “Video Format” is set to “Automatic” or “4K”, images will be output in 4K/24p. yy When this unit is connected to a TV compatible with 1080/24p and “Video Format” is set to “Automatic”, “1080i” or “1080p”, images will be output in 1080/24p. yy If images output in 24p are distorted, change the setting to “Off”.
Reference HDR10+ Setting You can set enable/disable of the HDR10+ function. By changing this setting to “On”, you can use the HDR10+ function under the following conditions: – A device (TV, etc.) that supports HDR10+ is connected ( 10). – A disc that supports HDR10+ is played back. yy The “Picture Settings” setting is disabled while using the HDR10+ function.
Reference UB450 UB159 COAXIAL Down Sampling Set the maximum sampling frequency to be used when outputting down-sampled audio from the COAXIAL terminal. yy Set a frequency supported by the connected device.
Reference BD-Live Internet Access ( 18) You can restrict Internet access when BD-Live functions are used. yyIf “Limit” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates. Network Easy Network Setting ( 14) Network Settings Perform network-related settings individually. Press [OK] to show the following settings: IP Address / DNS Settings This is for checking the state of the network connection and setting the IP address and DNS-related.
Reference Quick Start Speed of start-up from standby mode is increased. yy When set to “On”, the internal control unit will be powered. The idle power consumption will increase so compared to when set to “Off”. Ratings The following items use the same password. Don’t forget your password. DVD-Video Ratings Set a ratings level to limit DVD-Video play.
Reference Troubleshooting guide Before requesting service, please perform the following checks. If the problem remains unresolved, consult your dealer for instructions. ① While the unit is on Press and hold [ ] on the main unit and the [0] on the remote control at the same time for more than 5 seconds. –P OWER LED starts to flash, and “00 RET” is displayed on the screen. The following do not indicate a problem with this unit: – Regular disc rotating sounds. – Image disturbance during search.
Reference You have forgotten your ratings password. You want to cancel the ratings level. hh The ratings level returns to the factory defaults. ① While the unit is on Press and hold [ ] on the main unit and the [0] on the remote control at the same time for more than 5 seconds. – POWER LED starts to flash, and “00 RET” is displayed on the screen. ② Press [ ] (right) repeatedly on the remote control until “03 VL” is displayed on the screen. ③ Press [OK]. The TV screen turns black.
Reference Video is not output in 4K or high-definition. hh Confirm that “Video Format” in the Setup menu is set properly. ( 23) hh Confirm the HDMI cable, related connections and the compatibility of TV video input. hh To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device. ( 10) hh To enjoy image in 4K (50p/60p) with the connected 4K-compatible TV, set “4K(50p/60p) Output” to “4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”.
Reference Audio Playback Cannot switch audio. hh The audio cannot switch, if “Digital Audio Output” is set to “Bitstream” or “On”*. Set “Digital Audio Output” to “PCM” or “Off”*. ( 24) * For “DSD Output Mode” Disc cannot be played. hh The disc is dirty. ( 5) hh The disc is not finalized. ( 7) hh Depending on the Ultra HD Blu-ray disc, it may not be possible to perform playback unless this unit is connected to the Internet. Cannot hear the desired audio.
Reference Messages on the screen POWER LED When the POWER LED is flashing other than during power up or down of this unit, check the message on the TV screen. If a message is not displayed on the TV screen, determine the type of the error by checking the way the POWER LED is flashing. No compatible content on the disc. hh You inserted an incompatible disc. Cannot play this file. hh You tried to play a non-compatible video. This disc is incompatible. hh You inserted an incompatible disc.
Reference Specifications File format General Signal system Operating temperature range Operating humidity range UB450 UB159 DIGITAL AUDIO OUT (COAXIAL) HDMI OUT (19 pin type A) USB port (Type A) LAN (Ethernet) Port LASER Specification Power supply Power consumption File format Extension “.MKV”, “.mkv” PAL/NTSC +5 ºC to +35 ºC MKV (Compression methods Video: H.264/HEVC Audio:AAC, PCM, Vorbis, FLAC, Dolby Digital, DTS®) 10 % to 80 % RH (no condensation) 1 pc.
Reference File format Extension WMA “.WMA”, “.wma” DSD (DFF, DSF) “.DSF”, “.dsf”, “.DFF”, “.dff” ALAC AIFF “.M4A”, “.m4a” “.aif”, “.aiff” Reference This unit supports tags, but only titles, artist names and album names can be displayed. Maximum sampling rate: 48 kHz/385 kbps Audio information The audio output differs depending on the settings on the unit UB450 UB159 and which terminals are connected to the amplifier/receiver.
Reference UB450 Supported format for Network Contents Playback When this unit works as a Network Contents client, following contents are playable. yy File formats that are not supported by your Network Contents server* cannot be played. * DLNA compatible server, etc. Video Container Video codec Audio codec MKV AVCHD MP4 H.264 HEVC H.264 H.264 HEVC PS MPEG2 TS MPEG2 H.264 HEVC AAC PCM Vorbis FLAC Dolby Digital DTS® Dolby Digital AAC Example of file extension .mkv .mts .mp4, .
Reference Licenses “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/ Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates. Dolby, Dolby Audio, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
Reference - 37 -
DP-UB420-320-EB-TQBS0188_eng.book 45 ページ 2018年2月23日 金曜日 午後7時22分 Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0344 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.