Operating Instructions
- 29 -
Reference
Reference
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1 Press [HOME].
2 Select “Setup”.
3 Select “Player Settings”.
[UB420]
4 Select an item and change the settings.
To exit the screen
Press [HOME].
∫ Video Format
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Automatic”*
1
is selected, the best suited
output resolution to the connected TV is
automatically selected.
∫ 4K(50p/60p) Output
This unit automatically chooses to output images
in 4K*
2
(50p/60p) when connected to a 4K (50p or
60p) compatible TV.
≥ This item is available only when “Video Format”
is set to “Automatic” and “4K”.
≥ [UB420] This item is not available when
“HDMI(AUDIO) Output Mode” is set to
“Video+Audio”.
≥ To connect to a TV that supports 4K (50p/60p)
4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select
“4K(50p/60p) 4:4:4”.
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To connect to a TV that supports 4K (50p/60p)
4:2:0/8 bit, select “4K(50p/60p) 4:2:0”.
∫ 24p Output
Content recorded at 24p*
3
, such as BD-Video
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and “Video Format” is set to
“Automatic” or “4K”, images will be output in 4K/
24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and “Video Format” is set to
“Automatic”, “1080i” or “1080p”, images will be
output in 1080/24p.
≥ If images output in 24p are distorted, change
the setting to “Off”.
[UB420]
∫ HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to “Automatic ( Video Only / Video+Audio )”, the
TV may not output audio. In that case, select
“Video+Audio”.
[UB420]
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when “Video+Audio” is
selected.
[UB420]
∫ HDR10+ Setting
You can set enable/disable of the HDR10+
function.
By changing this setting to “On”, you can use the
HDR10+ function under the following conditions:
– A device that supports HDR10+ is connected
(> 10).
– A disc that supports HDR10+ is played back.
≥ The “Optimum HDR Adjustment” setting is
disabled while using the HDR10+ function.
(> 27)
HDMI
OK
RETURN
Player Settings
System
Ratings
Network
Language
3D
Sound
Picture
HDMI
Video Format
Automatic
4K(50p/60p) Output
Off
24p Output
Automatic
HDMI(VIDEO) Output Mode
Automatic
HDMI(AUDIO) Output Mode
Audio Only
HDR10+ Setting
On
Advanced Settings