Owner`s manual

ManualsBrandsPanasonic ManualsComputersDS-PAN-503

Owner’s Manual

Havis Docking Station

For Panasonic Toughpad A1

DS-PAN-500-SERIES_OMN_8-12

www.havis.com

1-800-524-9900

DS-PAN-501

DS-PAN-502

DS-PAN-503

DS-PAN-500 Series

Havis, Inc.

75 Jacksonville Road, PO Box 2099

Warminster, PA 18974

47801 Anchor Court

Plymouth, MI 48170

www.havis.com 1-800-524-9900

Summary of content (12 pages)

PAGE 1
Owner’s Manual Havis Docking Station For Panasonic Toughpad A1 DS-PAN-500 Series Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-500 Series Docking Station. For more information or to order, please visit www.havis.com. DS-PAN-501 DS-PAN-502 DS-PAN-503 DS-DA-218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office.
PAGE 2
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-500 Series Docking Station for the Panasonic Toughpad A1. For questions regarding the set-up of your DS-PAN-500 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
PAGE 3
Operation - Undocking (continued) Table of Contents 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station. Specifications Port Replication Capability Parts Included Installation Cable Management Operation - Docking Operation - Undocking Operation - Tilt/Swivel Tension Adjustment Optional Accessories 3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first.
PAGE 4
Parts Included Operation - Docking (continued) Docking Station Barrel Lock Latch Handle Locator Pin 3) Pivot tablet so the top aligns with the Locator Pin at the top of the Docking Station. Lower the Latch Handle to secure tablet in place.
PAGE 5
Installation Operation - Docking DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF TABLET ON DOCKING STATION. NOTE: Ensure a proper connection by aligning the tablet’s Alignment Sockets with the Docking Station’s Alignment Posts 1) Identify your required mounting configuration and select the appropriate fasteners from the Hardware Kit. OPTION A: Motion/mounting device with VESA 75mm hole pattern. Use Hardware Kit Item 4 (M4 x 0.
PAGE 6
Installation (continued) Cable Management OPTIONS B & C INSTALLATION: A) Once the location is determined for Docking Station, insert fastener (see options below) into mounting surface, leaving enough room for Mounting Plate to slide over fastener head. 1) Tip the Docking Station to a position that is comfortable to work with.
PAGE 7
Installation (continued) Cable Management OPTIONS B & C INSTALLATION: A) Once the location is determined for Docking Station, insert fastener (see options below) into mounting surface, leaving enough room for Mounting Plate to slide over fastener head. 1) Tip the Docking Station to a position that is comfortable to work with.
PAGE 8
Installation Operation - Docking DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF TABLET ON DOCKING STATION. NOTE: Ensure a proper connection by aligning the tablet’s Alignment Sockets with the Docking Station’s Alignment Posts 1) Identify your required mounting configuration and select the appropriate fasteners from the Hardware Kit. OPTION A: Motion/mounting device with VESA 75mm hole pattern. Use Hardware Kit Item 4 (M4 x 0.
PAGE 9
Parts Included Operation - Docking (continued) Docking Station Barrel Lock Latch Handle Locator Pin 3) Pivot tablet so the top aligns with the Locator Pin at the top of the Docking Station. Lower the Latch Handle to secure tablet in place.
PAGE 10
Operation - Undocking (continued) Table of Contents 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station. Specifications Port Replication Capability Parts Included Installation Cable Management Operation - Docking Operation - Undocking Operation - Tilt/Swivel Tension Adjustment Optional Accessories 3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first.
PAGE 11
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-500 Series Docking Station for the Panasonic Toughpad A1. For questions regarding the set-up of your DS-PAN-500 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
PAGE 12
Owner’s Manual Havis Docking Station For Panasonic Toughpad A1 DS-PAN-500 Series Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-500 Series Docking Station. For more information or to order, please visit www.havis.com. DS-PAN-501 DS-PAN-502 DS-PAN-503 DS-DA-218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office.