Owner`s manual

www.havis.com • 1-800-524-9900
Table of Contents
10 3
Specications
Port Replication Capability
Parts Included
Installation
Cable Management
Operation - Docking
Operation - Undocking
Operation - Tilt/Swivel Tension Adjustment
Optional Accessories
(Desktop Stand - DS-DA-218 / Rigid Mount Bracket - DS-DA-219)
3
3
4
5
7
8
9
10
11
Specications
Power Supply Input 12.0 V DC-In
Dimensions 10.65” ( 27.05 cm) H x 6.80” ( 17.27 cm ) W x 3.90” ( 9.91 cm ) D
Weight 1.46 lbs ( 0.54 kg )
Operating Environment -10° C to 50° C ( 14° F to 122°F )
Storage Environment -40° C to 85° C ( -40° F to 185° F )
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet
• Use only the specied Power Supply (Part # LPS-106) with this Docking Station
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specied for
• Do not leave the Docking Station in a high temperature environment (greater than 60°C, 140°F)
for a long period of time
• Do not connect cables to the DC Power Port or Ethernet Port exceeding 3 meters in length.
Precautions
Port Replication Capability
Operation - Tilt/Swivel Tension Adjustment
NOTE: A higher tilt/swivel tension may be required for rugged environments (in-vehicle use).
1) Remove the 11mm (7/16”) Socket Tool from the back of Docking Station.
CAUTION: Use of a tool other than the supplied Socket Tool may result in damage to Docking Station.
2) Slide the Tension Release Lever to the left and hold in place.
3) While holding Tension Release Lever in place, use the Socket Tool
to tighten or loosen the nut until desired Docking Station tilt/swivel
tension is obtained.
4) Replace Socket Tool to the back of the Docking Station.
Operation - Undocking (continued)
2) While holding tablet with one hand, lift the Latch Handle on the top
of Docking Station.
3) Once unlatched grab both sides of tablet, rock the top forward and carefully
lift out of Docking Station, top end rst.
TOP
of Docking Station
BOTTOM
of Docking Station
USB 2.0 (x2)
Ethernet RJ45
Power Input
(12 V DC IN)