Owner`s manual
www.havis.com • 1-800-524-9900
DS-PAN-501
DS-PAN-502
DS-PAN-503
Before Beginning Optional Accessories
(Original Instructions)
2 11
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-PAN-500 Series Docking Station for
the Panasonic Toughpad A1.
For questions regarding the set-up of your DS-PAN-500 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED
POWER SUPPLY (DS-PAN-502), REFER TO THE SUPPLIED LIND
POWER SUPPLY REFERENCE GUIDE.
EC DECLARATION OF CONFORMITY in accordance with EN 45014
Manufacturers Name: Havis, Inc.
Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Panasonic Toughpad A1
Model: DS-PAN-50X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment -
Radio disturbance characteristics - Limits and methods of measurement
EN 55024:2010, Information technology equipment - Immunity characteristics -
Limits and methods of measurement
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the
use of the provided e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA August 1, 2012 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-PAN-50X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
DS-DA-218 - Havis Desktop Stand
(For further Installation Instructions, refer to the Instructions included with DS-DA-218)
Please refer to the OPTION A INSTRUCTIONS on page 5 of this manual for
installation instructions.
DS-DA-219 - Rigid Mount Bracket
(For further Installation Instructions, refer to the Instructions included with DS-DA-219)
Rigid Mount option is available for rugged applications where the tilt/swivel
function is not necessary. Installation requires the removal of the Docking
Station’s Motion Device.