Owner`s manual
www.havis.com • 1-800-524-9900
8 5
Installation
1) Identify your required mounting conguration and select the appropriate
fasteners from the Hardware Kit.
OPTION A: Motion/mounting device with VESA 75mm hole pattern.
Use Hardware Kit Item 4 (M4 x 0.7x12mm long Pan Head Screw)
OPTION B: Havis vehicle motion/mounting equipment.
Use Hardware Kit Item 3 (1/4-20x5/8” long Button Head Screws)
OPTION C: Wall/Panel mount.
Hardware not supplied, use appropriate hardware for preferred mounting surface.
OPTION A INSTALLATION:
A) Align Docking Station mounting plate holes with the holes on VESA 75mm
hole pattern device. Using the (4) M4 0.7x12mm Pan Head Screws
(Hardware Kit Item 4), secure the Docking Station to device.
Torque screws to 20 in-lbs (2.3Nm) ± 10%.
NOTE: We recommend applying a drop of medium strength (blue)
thread locking adhesive to the threads of all fasteners.
OPTIONS B & C
1/4-20x5/8” Button Head Screws
OPTION A
M4 x 0.7 x 12mm Pan Head Screws
Operation - Docking
1) Ensure Docking Station is unlatched by lifting Latch Handle.
2) Hold tablet in landscape orientation, with bottom angled toward
Docking Station. Lower tablet into the bottom of the Docking Station.
DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE,
CHECK ALIGNMENT OF TABLET ON DOCKING STATION.
Alignment Posts
DS-PAN-500 Series Docking Station
Alignment Sockets
Back Side of Panasonic Toughpad A1
NOTE: Ensure a proper connection by aligning the tablet’s
Alignment Sockets with the Docking Station’s Alignment Posts
If access to tablet’s HDMI port
is needed for additional monitor
connection, open access door
BEFORE Docking the tablet.