Manual

Pressthenumberedbuttonsto selectan
item.
Or
Use[A, T, <1, I_] to highlight an item and
press [ENTER].
• Selecting a 2-digit number
e.g. 25: [->10]-_[2]-_[5]
• Other buttons used to operate menus
Read the disc's instructions for further
details about operation.
[IHIH]: Shows the next menu.
[1<<1]: Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU]: Shows the first menu screen.
[MENU]: Shows the menu screen.
DVD menus
DVD-Video can have several menus.
The menu displayed when you press
[TOP MENU] may be different from the
menu displayed when you press [MENU].
_ Example
I Lf_t_
Title 1 Title 2
ThetopmenudiSc'sI:Menu '_ '1_Menu '_1 .i
MENU
The position you stopped play at is recorded
by the unit when "1_" flashes on the LCD.
While "11_"is flashing on the LCD, press [11_]
(Play) to start play from where you stopped
it.
If you are playing DVD-Video, the following
message also appears.
Press [1_] (Play) while the message is
displayed and the beginning portions of
each chapter up to the current one are
played. Full play resumes from the point
where you stopped play.
(This feature works only within a title.)
If you do not press [1_] (Play), the message
disappears and play starts from where you
stopped it.
• To cancel
Press [m].
oThis only works if the disc's elapsed play
time is shown in the on-screen menu icons
(= page 24).
olt is cleared if you open the disc lid.
oThe unit saves the position even when you
switch the unit to standby except when
playing a play list (-_ page 21).
The disc is still spinning while a menu is on
screen. Press [m] if you have finished
viewing.
RQT6025