Manual

Enjoying virtual surround effects with
2 speakers or headphones (V.S.S.)
SP-V.S.S.: Dolby Digital, DTS, MPEG,
LPCM, 2-channel or over only
HP-V.S.S.: Dolby Digital, MPEG, LPCM,
2-channel or over only
Use V.S.S. to enjoy a surround-like effect if
you are using 2 front speakers or head-
phones. If you are playing a disc with
surround effects recorded on it, the effect is
broadened and sound seems to come from
virtual speakers on either side.
Turn off the surround effects on the other
equipment and use [-, VOL] to reduce the
volume on this unit to minimum (-_ page 12).
Press [V.S.S.] to select the V.S.S.
level.
Each time you press the button:
e.g. SP-V.S.S.
ILIR_
1 (Natural
effect)
2 (Emphasized OFF
effect) (Cancel)
• To change the V.S.S. mode
1. Use [<1] to select "SP" or "HP".
2. Use [A, T] to change the mode.
Optimum seating position
I_ DistanceA = I
unit. ,Television vl
or N
Speaker Speaker
3 or 4 times
distance A
Seating
position
<When using the
television's
speakers>
Distance A=
Television's width
eV.S.S, will not work, or will have less
effect, with some discs.
eV.S.S, may cause distortion with some
discs. Turn V.S.S. off if this occurs.
eOutput from this unit will be in stereo (two
channels) when V.S.S. is on.
eThe speakers on this unit will not produce
any discernable effect.
Changing the play sequence ,=,..,..=.,...,.,...,,,j
The unit plays the tracks in all the groups on
a disc.
While stopped
A
-I Press [PLAY MODE] until the all
group play screen appears.
2 Press [1_] (Play).
• To exit all group mode
Press [PLAY MODE] while stopped until the
all group play screen disappears.
RQT6025