Operation Manual

L
R
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
VIDEO OUT
AUDIO OUT
Please connect
directly to TV
COAXIAL
L
R
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
VIDEO OUT
AUDIO OUT
Please connect
directly to TV.
COAXIAL
AV
AC IN ~
Home cinema
White
Red
Rear of
DVD player
To be able to hear sound in stereo or Dolby Pro Logic quality, attach an amplifier or an analogue audio component
supporting these features.
!
To avoid sound quality problems deactivate function Advanced Surround when you attach an amplifier with
Dolby Pro Logic functionality. Please refer to page 15.
Digital connectors (COAXIAL)
To play programmes with a 5.1-channel surround sound, connect the digital audio output (COAXIAL) with an
external "Multi-channel Dolby Digital amplifier" or similar appliance.
Prerequisites for making recordings with an external digital recorder
- The original disc must not be copy-protected.
- The recorder must be able to process signals with a scanning frequency of 48 kHz/16 bit.
- You cannot make MP3/WMA recordings.
Connectors
Before connecting
!
Verify that all devices to be connected up are unplugged from the AC mains.
Connection to a TV set without a scart socket or to
an amplifier component (home cinema):
Connection to a TV set with scart socket:
Rear of
DVD/CD player
21-pin scart cable
Yellow
Red
White
Note on all connections shown
Attach the unit directly to the TV set. If you let the player connection go through a video recorder
You will experience a disturbed picture when playing copy-protected DVDs.
5
When the unit is fully connected up
attach the AC mains cable.
D
Adapt the Audio SETUP menu settings (see page 19) to the following:
PCM Digital Output: [up to 48 kHz]
Dolby Digital / DTS Digital Surround / MPEG: [PCM]
D
Deactivate function Advanced Surround (see page 15).