Operation Manual

16
Basic settings
16:9
4:3
Select your TV's aspect ratio.
QUICK SETUP
Select the output combination for the AV
and component terminals.
QUICK SETUP
RGB/No Output
This completes the basic settings. If you want to
change any of these settings, go to Others
in the SETUP menu.
Select the subtitle language.
Select "Automatic" to show subtitles when the
audio language is not recorded on the disc.
Die Menü-Sprache wählen .
German
Spanish
Swedish
French
Italian
Portuguese
English
QUICK SETUP
Other
****
Dutch
Automatic
Select the subtitle language:
If the language you want is not on the list, go to menu item "Other" and type in the
appropriate language code ( see page 45 ) using the numeric key pad of your remote
control unit.
Select your TV's aspect ratio:
The picture format of TV screens is either 4:3 (standard) or 16:9 (wide-screen).
Select the aspect ratio that matches the screen format of your TV set.
Select the output combination for the AV and component terminals:
Before you proceed please check which setting is supported by your TV set.
Please refer to the operating instructions of your TV set.
Then make the appropriate settings:
To improve the quality of the picture, you can set the video signal output via the
terminal from "Video/Y P P " ( standard quality ) to either "S-Video/Y P P "
( enhanced quality ) or "RGB/No Output" ( best quality ).
and : These settings are available only if you connect the DVD player
via 21-pin scart cable ( see page 11 ).
If the connection is made via the Component Video Out
terminal ( see page 12 ), select "Video/Y P P " or "S-Video/Y P P ".
AV :
S-Video RGB
Component Video Out :
BR BR
BR BR
Video/Y PB PR
S-Video/Y PB PR