Operation Manual

SETUP menu

Video Out (AV/Component):

Please refer to page 16 "Basic settings" : "Select the output combination for the AV

and component terminals".

SETUP

ENTER

RETURN

TAB

SELECT

TV Aspect

Video Out (AV/Component)

Still Mode

NTSC Disc Output

4:3 Pan&Scan

Video/Y PB PR

Automatic

PAL 60

Video

TV Aspect :

The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen).

Choose the 16:9 format if your player is attached to a wide-screen TV set.

If it is attached to a standard TV screen you can choose either 4:3 Pan&Scan

or 4:3 Letterbox (see illustration):

Pan&Scan:

Automatically crops a 16:9 picture and turns it into an optimum 4:3

picture producing neither black bars nor distortions.

This format is not supported by all DVDs.

Letterbox:

Black bars will appear at the top and bottom edge of the screen to

allow the reproduction of wide-screen video material on a standard

TV screen.

Still Mode :

Every picture frame is made up of two fields which are output to the screen one

after the other.

Both fields of a picture alternate on the screen. Although the image may be

somewhat fuzzy, its quality is better than that of a field-based still image.

Automatic:

Field:

The unit automatically selects the optically better type of image.

Poorer quality than a frame-based image; however, the image is less fuzzy.

Frame:

NTSC Disc Output :

To play a NTSC disc, select a colour rendition standard (NTSC/PAL60) that

matches the function of your TV set.

Please refer to the operating instructions of your TV set.