Operation Manual

SETUP

ENTER

RETURN

TAB

SELECT

PCM Down Conversion

Dolby Digital

MPEG

Dynamic Range Compression

PCM

Bitstream

PCM

Off

Audio

DTS Digital Surround

Audio during Search

SETUP menu

Dolby Digital/ :DTS Digital Surround/MPEG

Please choose the correct settings matching your audio system:

Dolby Digital

DTS Digital Surround

MPEG

PCM

Bitstream

Your equipment can

decode the signal

Your equipment can

not decode the signal

If the equipment you connected cannot decode the signal, the setting must be

changed to PCM. If not, signals that the equipment cannot process will be output by

this unit causing high levels of noise which can damage your hearing and the speakers

PCM Down Conversion : Pulse Code Modulation

PCM is the standard method used to record digital music signals on audio CDs.

DVD-Videos can be produced using the linear PCM method which is based on a

sampling frequency of up to 96 kHz.

Select "Yes" if an optical digital audio cable is used to connect your player to an

amplifier that only processes sampling frequencies of up to 48 kHz.

For reasons of copyright protection, the digital output of PCM audio signals may be

limited to 48 kHz/16 bit.

Dynamic Range Compression :

Available in the Dolby Digital ( DVD ) format only.

This function compresses the volume range by putting up the level of soft passages

and lowering the level of loud passages, e.g. to turn down the overall volume late at

night.

This option allows you to say whether or not the volume range is to be compressed.

Audio during Search :

Lets you decide whether or not the sound is to be on during the search.