Operation Manual

26
DVD-V
DVD-V
WMA
WMA
RAM
WMA
WMA
JPEG
VCD CD
MP3
WMA
DVD-A
Position memorized
Position cleared
POSITION MEMORY
Use the function if you wish to resume disc playback at a particular
position.
The position tag is retained when you change discs or when the unit goes into stand-by
mode.
You can tag and directly access up to 5 discs.
This function is available only if the elapsed playback time is displayed when playing the
disc.
Position Memory
!
Press during playback.
The "Position memorized" box will be displayed.
You can now press to go into stand-by mode or change discs.
Press to replay the disc again. Playback will be resumed at the stored position
and the position tag will be cleared.
Some discs do not fully support all of this function.
POSITION MEMORY
PLAY
!
!
!
D
Chapter review
This function lets you browse back through the chapters of a DVD-V by playing the first
couple of seconds of every chapter.
Normal playback will be resumed at the point where you stopped it.
Do press if you do not wish to browse back through the chapters.
After a couple of seconds, normal playback will be automatically resumed at the point
where it was stopped.
!
!
Press during playback.
Press . Screen "Press PLAY to Chapter Review" is displayed.
Press . The first couple of seconds of every chapter are played back.
STOP
PLAY
PLAY
PLAY
!
!
not
General playback