Operation Manual

41
The picture is disturbed when
searching:
PICTURE PROBLEMS
!
This is a technical issue and not indicative of a malfunction.
The screen outputs no picture:
!
!
Check the connections.
Verify that the correct video input of the TV set has been selected.
The picture is cut off at its left
or right edge:
DISPLAY PROBLEMS
The message "NO PLAY" appears:
No messages are output to
the screen:
The OSD displays are cut off
along their top edge:
!
!
The player cannot play discs of the current format.
The disc contains no recorded material.
!
Go to the SETUP screen and set menu option "On-Screen Messages" to "On".Display
!
Move the display position down.
Error code " " appears: :H
Before requesting service
!
!
!
Go to the SETUP screen and check the "TV Aspect" setting in the menu.
Check whether the player is directly plugged into the TV set's "AV IN (Scart)" or whether it is going
through a video recorder between the two units.
Check the Zoom setting ( page 28 ).
Video
!
!
!
This is indicative of a malfunction. The digits following "H" depend on what state your player is in.
Press [ ] to put the player into stand-by mode, then briefly unplug and re-attach the AC mains cable.
Contact the aftersales service if this does not remove the problem. Please state the error code displayed
by the set.
/I
The model no. and serial no. of this product are stuck down on the rear of the appliance.
Please enter them below to serve as reference.
Model No.
Serial No.
There is no audio output and
the sound is distorted:
The loudspeakers emit
loud noise:
AUDIO PROBLEMS
!
!
Check the connections.
Deactivate the ADVANCED SURROUND effect.
!
Go to the SETUP screen and check the menu settings of "Dolby Digital","DTS Digital
Surround" and "MPEG".
Audio