User Guide

8
RQT8847
Basic play
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
Standby/on indicator (Í)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
[Note]
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫]
when you finish to preserve the unit’s motor and your television screen.
≥ To play MP3, JPEG, MPEG4 or DivX video contents on DVD-RAM that contain both
[DVD-VR] and another format (e.g. [JPEG] ), select “Play as Data Disc” (➜ page 17,
Other Menu).
≥ Total title number may not be displayed properly on iR/iRW.
4
1
PauseStop
1Power ON.
2Open the disc tray.
3Load the disc.
4Start play.
Remote control sensor
≥
Load double-sided discs so the label for the side you want
to play is facing up.
≥ DVD-RAM : Remove discs from their cartridges before use.
Skip
≥ [DVD-VR] Can also skip to the markers.
Stop
The position is memorized when “!” flashes on the display.
≥ Press [1] (PLAY) to resume. (
Resume play )
≥ Press [∫] to clear the position.
≥ Even after the unit is turned off, the position is memorized
(
Normal playback only ).
Search (during play)
Slow-motion (during pause)
≥ Up to 5 steps
≥ Press [1] (PLAY) to restart play.
≥
[VCD] Slow-motion: forward direction only
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Pause
≥ Press [1] (PLAY) to restart play.
Repeat play
≥ Select “Repeat” (➜ page 12, Repeat play) or “A-B Repeat”
(➜ page 16, Play Menu).
If you are experiencing problems, refer to troubleshooting guide (➜ page 22, 23).
Basic play
RQT8847-B_0720.fm Page 8 Thursday, July 20, 2006 2:38 PM