DVD / CD Player DVD-S500 DVD-S700 Reference Operations Model No. Getting started Operating Instructions DVD-S700 Dear customer Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. (DVD-S700 only) Model number suffix “EB” denotes UK model. EB EP GN GA GJ GC GF VQT5C27_DVD-S700_500_En.
Caution for AC Mains Lead (For the AC mains plug of three pins) (“EB” or “GC” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere*1 fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere*1 and that it is approved by ASTA or BSI to BS1362.
Safety precautions AC mains lead • To reduce the risk of fire, electric shock or product damage, – Ensure that the power supply voltage corresponds to the voltage printed on this unit. – Insert the mains plug fully into the socket outlet. – Do not pull, bend, or place heavy items on the lead. – Do not handle the plug with wet hands. – Hold onto the mains plug body when disconnecting the plug. – Do not use a damaged mains plug or socket outlet. • The mains plug is the disconnecting device.
Table of contents Getting started Caution for AC Mains Lead ............................... 2 Safety precautions ............................................ 3 WARNING ...................................................... 3 CAUTION ....................................................... 3 General Information .......................................... 4 Accessories .................................................... 4 Inserting the batteries ..................................... 5 Region codes ............
*6 Inserting the batteries Insert so the poles (+ and –) match those in the remote control. *7 (For the United Kingdom, Ireland, Eastern Europe and South Africa) Subtitle text file is supported. (For others) Subtitle text file is not supported. Certified to the Xvid Home Profile. Region codes DVD-Video This DVD player is designed to support the Region Management System. Confirm the region number for the unit on the rear panel. Check the regional code number on the disc package.
Connections FOR THE UNITED KINGDOM, IRELAND, SAUDI ARABIA AND KUWAIT ONLY READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION. DVD-S500 VIDEO OUT Before making any connections we suggest you temporarily disconnect all the units from AC power. • Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit. • Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.
DVD-S700 VIDEO OUT HDMI Audio/Video cable (supplied) HDMI IN HDMI cable AV OUT AUDIO OUT Getting started AUDIO IN R L VIDEO IN VIDEO OUT AV AUDIO OUT AV (Scart) VIDEO OUT With HDMI compatible amplifier Connections AV OUT • Connect terminals of the same color. (For the model with AV (21 pin) only) HDMI IN AV IN HDMI cable Amplifier 21-pin SCART cable AV AV OUT AUDIO OUT HDMI IN HDMI OUT HDMI cable VIDEO OUT AV AV OUT VIDEO OUT VQT5C27 AUDIO OUT 7 VQT5C27_DVD-S700_500_En.
Control guide 1 ュリヴヱロモヺ ヰヱユワ ヤロヰヴユ ヒ ビ ピ フ ブ プ ヘ ベ ペ 2 ヴユモンヤラチヮヰュユ パ ヒパ ヵヰヱチヮユワヶ ヮユワヶ ヴユヵヶヱ 3 ンユヵヶンワ ヴユモンヤラ ヴレリヱ ヴヵヰヱ ヱロモヺ ヱモヶヴユ ヤモワヤユロ ヴヶャヵリヵロユ ンモワュヰヮバモワヨロユ モヶュリヰ ・ヰヰヮ ヱンヰヨンモヮ ヶヴャ 4 5 6 ョンモヮユ ンユヱユモヵ モノャチンユヱユモヵ ヴロヰヸ ヶヴャチンユヤ 1 4 1 VQT5C27 7 8 8 9 Standby/on switch ^, 8 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. DISPLAY Displays information on TV screen during playback.
Stopping playback Press STOP g. The stopped position is memorized. Power Resume function Press PLAY/PAUSE q/h to restart from this position. This position is memorized even after power outage (Power Resume). However, if the restart position is misaligned or depending on the media and playback conditions, the unit may not operate normally. Getting started Operations • If this unit is not switched to the USB mode when connecting the USB device, press USB and press w q to select the item.
USB REC (CD Ripping) HDMI CEC protocol You can copy audio files (CD-DA) from a CD on a USB device into MP3 format. Connect the USB device. Play an audio CD. During play, press USB REC. Press w q to select “YES”, and press OK. (DVD-S700 only) The DVD player supports HDMI CEC (Consumer Electronics Control) protocol. Panasonic does not guarantee 100 % interoperability with all HDMI CEC devices. • Set “HDMI CEC” to “On” ( page 11).
Changing the player settings TV System This menu contains the options for selecting the color system that matches the connected TV. NTSC Video signal from PAL disc playback will be output in NTSC format. PAL Video signal from NTSC disc playback will be output in PAL format. PAL60 Video signal from NTSC disc playback will be output in PAL60 format. Auto Video output signal will be set automatically to suit the connected TV. Screen Saver This setting enables the Screen Saver to activate.
Changing the player settings AUDIO Audio Out (DVD-S700 only) This sets the audio output method when connected to the “HDMI AV OUT” terminal. Bitstream When the connected equipment is supporting Dolby Digital PCM When the connected equipment is not supporting Dolby Digital Dynamic Range Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level. OTHER Rating This sets the playback limitation level for DVD video discs.
Specifications Reference Operations Specifications are subject to change without notice. Changing the player settings Dimensions (W x D x H): 310 mm x 210 mm x 39 mm (Including the projecting parts) Mass: Approx. 1.1 kg VQT5C27 Audio output: Output level: 2 Vrms (1 kHz, 0 dB) Output connector: Pin jack (1 System) [The model with AV (21 pin)] AV (21 pin) Number of connectors : [The model with AV (21 pin)] 2 channel (2 System) [The model without AV (21pin)] 2 channel USB slot: USB2.
Troubleshooting Before requesting service, make the following checks. If you still need assistance, consult your dealer for instructions. To reset Images from this DVD player do not appear on the television. You forget your password. Reset the DVD player to the factory defaults. 1) Press 8 on the DVD player to turn it on. 2) Press OPEN/CLOSE ; to open the disc tray. 3) Press the number button “5” on the remote control 4 times. (The power is automatically turned off.
Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
