Instruction Manual (EB/EG/GCS/GN/EE) EN
20
RQT7424
Changing the player settings
Video
Audio
§ [For[Asia[ MPEG is not available.
TV Aspect
Choose the
setting to suit your
television and
preference.
≥
4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills
the screen (unless prohibited by the disc).
≥
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥
16:9: Widescreen television
Use the television’s screen modes to change the way the picture is shown.
Still Mode
Specify the type of
picture shown
when paused.
≥
Automatic
≥
Field: The picture is not blurred, but picture quality is lower.
≥
Frame: Overall quality is high, but the picture may appear blurred.
NTSC Disc Output
Choose PAL 60 or
NTSC output when
playing NTSC discs.
≥ PAL60: When connected to a PAL television
≥
NTSC: When connected to an NTSC television
PCM Digital
Output
(Only when
connected using a
digital optical cable
➜
page 21)
Check the digital input limitations of the equipment you connect and select
the maximum sampling frequency of PCM digital output.
Off:
When not connected using a digital optical cable
Up to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz
≥
Signals from copy-protected discs are converted to 48 or 44.1 kHz.
≥
Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they
can handle 96 kHz. Read your equipment’s operating instructions for details
.
Dolby Digital
(Only when connected
using a digital optical
cable
➜
page 21)
≥
Bitstream
≥
PCM
Select “Bitstream” when the equipment can decode
the bitstream (digital form of multi-channel data).
Otherwise, select “PCM”.
≥
If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.
DTS Digital
Surround
(Only when connected
using a digital optical
cable
➜
page 21)
≥
PCM
≥
Bitstream
MPEG
§
(Only when connected
using a digital optical
cable
➜
page 21)
≥
PCM
≥
Bitstream
Dynamic Range
Compression
(Dolby Digital only)
≥ Off
≥ On: For clear dialogue when listening at low volume.
Audio during
Search
Choose whether to
have sound during
search
≥
On
≥
Off
Changing the player settings
7424-1B_p2-35.fm 20 ページ ２００４年５月１９日 水曜日 午後１時２７分