Operating Instructions - Language - English
27
RQT5869
Home Theater
CENTER SURROUND
(L) (R)
FRONT
(L) (R)
SUB-
WOOFER
OPTICAL
OPTICAL
L
CENTER
R
R/
FRONTR
SUB-
WOOFER
R
SURROUND
L/
FRONTL
SURROUND
L
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AUDIO OUT
5.1 ch 2 ch
OPTICAL
L
R
SUB-
WOOFER
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
@ Back of the unit
A Connect cables to
terminals
corresponding to
the speakers you
have connected.
»
B
Connecting an amplifier with a built-
in decoder or a decoder-amplifier
combination
[DVD-RV41] [DVD-RV31]
»
A
Connecting an amplifier with 5.1-
channel audio input terminals
[DVD-RV41]
D Optical digital audio cable
Do not bend when connecting.
³Select “Multi-channel” and adjust the settings to suit the
speakers you have connected (á page 24).
³Select “No” in “PCM Down Conversion” (á page 25).
Note
³Turn Advanced Surround off (á page 14) if you have connected a
center speaker, surround speakers or a subwoofer, as well as the
front speakers. Sound will not come from the other speakers if
Advanced Surround is on.
³Use the connection described in [B] at right to enjoy DVDs encod-
ed with DTS.
³If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
C Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
Adjust the settings to suit the equipment you have con-
nected (á page 25).
Note
You cannot use DTS Digital Surround decoders not suited to DVD.
@ Back of the unit
B Amplifier
E Insert fully, with
this side facing
up.
= Audio cable
> White (L)
? Red (R)