Operating Instructions - Language - English

28
RQT5869
Home Theater
OPTICAL
R
L
AUX IN
OPTICAL
L
R
SUB-
WOOFER
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
L
R
SUB-
WOOFER
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
»
E
Connecting an active subwoofer (optional)
[DVD-RV31]
You can enjoy more powerful bass by connecting an active subwoofer.
Recording to MDs or cassette tapes
[DVD-RV41] [DVD-RV31]
OPTICAL
L
R
SUB-
WOOFER
AUDIO OUT
VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
C Audio cable
D To the subwoofer’s
input terminal
Home Theater–Enjoying more powerful sound
º Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
³There is no copy guard recorded on the disc.
³The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical digital audio
cable (á [D] above).
2. When recording DVDs, change the digital audio output settings
(á page 25).
PCM Down Conversion: Yes
Dolby Digital: PCM
DTS Digital Surround: Off
MPEG
¤
: PCM
¤
Only DVD-RV41 for all regions and DVD-RV31 for the United
Kingdom, Continental Europe, Australia and N.Z.
º Analog recording
You can record to an MD or cassette tape. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
1. Connect the recording equipment with an audio cable (á [C]
above).
2. Set “Speaker Setting” to “2-channel” (á page 22). [DVD-RV41]
(If this is set to “Multi-channel”, only the audio for the front 2
speakers will be recorded.)
»
C
Connecting an analog amplifier or
system component
[DVD-RV41] [DVD-RV31]
? Audio cable
»
D
Connecting a digital amplifier or
system component
[DVD-RV41] [DVD-RV31]
³Select “2-channel” (á page 22, Audio–Speaker Setting).
[DVD-RV41]
³Select “No” in “PCM Down Conversion” (á page 25).
Adjust the settings to suit the equipment you have con-
nected (á page 25).
> (Red)(White)
³Place the subwoofer as close as possible to the front cent-
er.
³Turn BASS PLUS on to boost the output from the subwoofer
(á page 14).
³Adjust the volume on the subwoofer to suit your preference.
A Optical digital
audio cable
Do not bend
when connecting.
= Back of the unit= Back of the unit
To enjoy Dolby Pro Logic
³If you connect an amplifier with a Dolby Pro Logic decoder, you will also need to connect center and surround speakers to enjoy
surround sound. Read the instructions for the equipment for connection details.
³Turn Advanced Surround and Bass Plus off (á page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surround
and Bass Plus is on.
@ Amplifier or
system component
(Red)(White)
B Insert fully, with
this side facing
up.