Dvd Player User Manual

2. Disconnect the 2 flexible cables.

11.6. Disassembling the Stepping

Motor Unit

1. Disconnect the flexible cable.

2. Remove the 2 screws.

Note

Take care when handling the flexible cable because it can

be broken by excessive force.

11.7. Disassembling the Optical

Pickup Unit

1. Remove the screw.

2. Release the tab, then remove spring holder 1.

Note

Be sure not to lose the spring.

3. Remove the guide shaft.

Note

Be sure to adjust the optical pickup tilt after replacing

the optical pickup.

(Refer to section 11.12, Opitcal Pickup Tilt Adjustment.)

DVD-RV60