Operating Instructions
RQTC0077
15
VIDEO OUT-SCART
]5
Choose the video signal
format to be output
from the SCART and
COMPONENT VIDEO
OUT terminals
(è page 6).
VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
VIDEO OUT (I/P)
Select
“PROGRESSIVE”
only if connecting to
a progressive output
compatible television.
INTERLACE PROGRESSIVE
When you select “PROGRESSIVE”, a message screen will
appear.
For progressive output, press [e] and then press [ENTER].
Press [RETURN] to cancel.
•
•
“AUDIO” tab
SETTING STATE Display the current setting of the items below
DOWN SAMPLING
Check the digital
input limitations of the
equipment you connect
using COAXIAL terminal
and select the maximum
sampling frequency of
PCM digital output.
ON:
When connected to equipment compatible with 44.1 or 48 kHz
OFF:
When connected to equipment compatible with 88.2 or 96 kHz
Signals from copy-protected discs are converted to 48 or
44.1 kHz.
Some equipment cannot handle sampling frequencies
of 88.2 kHz, even if they can handle 96 kHz. Read your
equipment’s operating instructions for details.
•
•
DOLBY DIGITAL
With COAXIAL
connections (è page 7)
BITSTREAM PCM Select “BITSTREAM” when
the equipment can decode the
bitstream (digital form of multi-
channel data). Otherwise,
select “PCM” or “OFF”. (If
the bitstream is output to the
equipment without a decoder,
high levels of noise can be
output and may damage your
speakers and hearing.)
DTS
With COAXIAL
connections (è page 7)
BITSTREAM OFF
MPEG
]5] 6
With COAXIAL
connections (è page 7)
BITSTREAM PCM
DYNAMIC RANGE ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound
level and the highest sound level. Convenient for late
night viewing. (Only works with Dolby Digital)
OFF
n
“DISPLAY” tab
SETTING STATE Display the current setting of the items below
LANGUAGE
]5
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
ITALIANO SVENSKA NEDERLANDS POLSKI
]6
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
ITALIANO ÐÓÑÑÊÈÉ NEDERLANDS PORTUGUÊS
]7
ENGLISH 繁體中文
“OTHERS” tab
SETTING STATE Display the current setting of the items below
JPEG TIME To change the slideshow timing
1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
“3 SEC” is the factory preset.•
FL DIMMER
]5
Changes the brightness
of the unit’s display
BRIGHT DIM
AUTO: The display is dimmed, but brightness only when you
perform some operations.
AUTO POWER OFF ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
DEFAULTS
This returns all values in
the Setup menus to the
default settings.
RESET
The password screen is shown if “RATINGS” (è page 14) is
set. Please enter the same password with [e r] and [q],
then press [ENTER], then turn the unit off and on again.
n
n
]1
Language options
The United Kingdom and Continental Europe
FRENCH, SPANISH, GERMAN, ITALIAN, SWEDISH, DUTCH and POLISH
The Middle East and South Africa
FRENCH, SPANISH, GERMAN, ITALIAN, RUSSIAN, DUTCH and PORTUGUESE
Asia
CHINESE TRAD
]2
The original language designed on the disc is selected.
]3
Input a code number referring to the table (è page 16).
]4
If the language selected for “AUDIO” is not available, subtitles appear in that
language (If available on the disc).
]5
The United Kingdom and Continental Europe
]6
The Middle East and South Africa
]7
Asia
Changing the player settings