Instruction Manual (EB) EN

PO
SITIO
N
MEMOR
Y
DVD-Video
DVD-Video
WMA
JPEG
CD
MP3
RAMVideo CD
14
Playback functions
D
Do not press PLAY if you do not wish to browse back through the chapters.
After a couple of seconds, normal playback will be automatically resumed at
the point where it was stopped.
POSITION MEMORY
Use the Position Memory function to resume disc playback at a set position.
You can tag and directly access up to 5 discs.
The position tag is retained when you change discs or when the unit goes into
stand-by mode.
!
Press POSITION MEMORY during playback.
A message appears: Position memorized.
You can now change discs or go into stand-by mode.
!
Press PLAY to play back the disc again. Playback is resumed at the stored
position and the position tag is cleared.
D
Some discs do not fully support all of this function.
Chapter review
This function lets you browse back through the chapters of a
DVD-V by playing the first couple of seconds of every chapter.
!
Press STOP during playback.
!
Press PLAY .
A message appears: Press PLAY to Chapter Review.
!
Press PLAY again.
The first couple of seconds of every chapter are played back. Normal playback is
resumed at the point where you stopped it.