Instruction Manual (EB) EN

7
On-screen display
On-screen display
On-screen display
14
15
PL
AY
P E
A
US
SKIP
ZOO
M
PL
AY MODE
O
N
P SIT
IO
ME
M
ORY
QUICK REPLAY
REPEAT
STOP
SLOW/SEARCH
13
23
Random Playback/Program Play.
12
Skip chapters, titles or frames
!
Press SKIP during playback or in Pause mode.
Resumes playback at stored
Position following an interruption.
Zoom
!
Press ZOOM during playback.
To fine-tune the zoom factor press
To set the zoom mode: ENTER and .
Scene replay
!
Press QUICK REPLAY during playback.
Every push of the button replays a couple of
seconds of the current track or programme.
However, you cannot go back to before the
beginning of a title.
D
QUICK REPLAY is not supported by all discs.
Playback control
Stop playback
!
Press STOP twice.
Start playback
!
Press PLAY .
Playback starts automatically.
Pause playback (still image)
!
Press PAUSE during playback.
Playback stops at the current picture frame.
!
Press PLAY to resume playback.
Repeat
!
Press REPEAT during playback.
There is no mode for repeatedly playing back
entire discs.
Slow motion (backwards/forwards)
!
Press SLOW in Pause mode.
Keeping the button pressed increases the speed
of search at 5 steps.
!
Press PLAY to resume normal playback.
Search
!
Press SEARCH during playback.
Keeping the button pressed increases the speed of
search at 5 steps.
Restore factory setting
!
Press ZOOM until x1.00 is shown.
The zoom functionality may be restricted
depending on the disc format.
Resume
!
Press STOP during playback
to store the current position on the disc.
!
Press PLAY while [ ] is flashing on the display.
Playback is resumed at the point where you stopped it.
D
VCDs do not support reverse slow motion playback.
D
Opening the disc tray or the unit going into stand-by
mode also clears the stored position on the disc.
Cancel the Resume function
!
Press STOP until [ ] disappears from the display.